Advanced Search
DSpace@MIT

Browsing Center for Advanced Nuclear Energy Systems (CANES) by Title

Research and Teaching Output of the MIT Community

Browsing Center for Advanced Nuclear Energy Systems (CANES) by Title

Sort by: Order: Results:

  • Ko, Yu-Chih; Kazimi, Mujid S. (Massachusetts Institute of Technology. Center for Advanced Nuclear Energy Systems. Advanced Nuclear Power Program, 2010-10)
    The conceptual design of an annular-fueled superheat boiling water reactor (ASBWR) is outlined. The proposed design, ASBWR, combines the boiler and superheater regions into one fuel assembly. This ensures good neutron ...
  • Bean, Malcolm K.; Dewitt, Gregory Lee; Cabeche, Dion T.; Gerrity, Thomas P.; Haratyk, Geoffrey; Kersting, Alyssa R.; Lee, Youho; Virgen, Matthew M.; Lenci, Giancarlo; Lin, Christie; Metzler, Florian; Ochoukov, Roman Igorevitch; Reed, Mark; Sobes, Vladimir; Sugrue, Rosemary M.; Shwageraus, Eugene; Wisniowska, Agata Elzbieta; Youchak, Paul M. (Massachusetts Institute of Technology. Center for Advanced Nuclear Energy Systems. MIT Reactor Redesign Program, 2011-08-01)
    Molten salt is a promising coolant candidate for Advanced High Temperature Reactor (AHTR) Gen-IV designs. The low neutron absorption, high thermal capacity, chemical inertness, and high boiling point at low pressure of ...
  • Lee, Youho; Forsberg, Charles W. (Massachusetts Institute of Technology. Center for Advanced Nuclear Energy Systems. Nuclear Energy and Sustainability Program, 2011-06)
    Nuclear plants have high capital costs and low operating costs that favor base-load operation. This characteristic of nuclear power has been a critical constraint that limits the portion of nuclear power plants in a grid ...
  • Hejzlar, Pavel; Driscoll, Michael J.; Kazimi, Mujid S. (Massachusetts Institute of Technology. Center for Advanced Nuclear Energy Systems. Advanced Nuclear Power Program, 2000-02)
    Destruction of actinides in accelerator-driven subcriticals and in stand-alone critical reactors is of contemporary interest as a means to reduce long-term high-level waste radiotoxicity. This topical report is focused ...
  • Truong, Bao H.; Hu, Lin-Wen; Buongiorno, Jacopo (Massachusetts Institute of Technology. Center for Advanced Nuclear Energy Systems. Advanced Nuclear Power Program, 2008-06)
    Nanofluids are engineered colloidal dispersions of nanoparticles (1-100nm) in common fluids (water, refrigerants, or ethanol…). Materials used for nanoparticles include chemically stable metals (e.g., gold, silver, ...
  • Herman, Bryan R.; Shwageraus, Eugene; Forget, Benoit; Kazimi, Mujid S. (Massachusetts Institute of Technology. Center for Advanced Nuclear Energy Systems. Nuclear Fuel Cycle Program, 2011-06)
    High conversion water reactors (HCWR), such as the Resource-renewable Boiling Water Reactor (RBWR), are being designed with axial heterogeneity of alternating fissile and blanket zones to achieve a conversion ratio of ...
  • Driscoll, Michael J.; Jensen, K. G. (Massachusetts Institute of Technology. Center for Advanced Nuclear Energy Systems. Nuclear Fuel Cycle Program, 2010-05-01)
    This is a progress report covering work through mid-May 2010 under a Sandia-MIT contract dealing with design and siting/licensing criteria for deep borehole disposal of spent nuclear fuel or its separated constituents. It ...
  • Kempf, Stephanie A.; Hu, Lin-Wen; Forget, Benoit (Massachusetts Institute of Technology. Center for Advanced Nuclear Energy Systems. MIT Reactor Redesign Program, 2011-06-01)
    In response to increasing demands for the services of research reactors, a 5 MW LEUfueled research reactor core is developed and optimized to provide high thermal flux within specified limits upon thermal hydraulic ...
  • Short, Michael P.; Ballinger, Ronald G. (Massachusetts Institute of Technology. Center for Advanced Nuclear Energy Systems. Advanced Nuclear Power Program, 2010-10)
    A material that resists lead-bismuth eutectic (LBE) attack and retains its strength at 700°C would be an enabling technology for LBE-cooled reactors. No single alloy currently exists that can economically meet the required ...
  • Ellis, T.S.; Forget, Benoit; Kazimi, Mujid S.; Newton, T.; Pilat, Edward E. (Massachusetts Institute of Technology. Center for Advanced Nuclear Energy Systems. MIT Reactor Redesign Program, 2009-02-01)
    Worldwide, there is limited test reactor capacity to perform the required irradiation experiments on advanced fast reactor materials and fuel designs. This is particularly true in the U.S., which no longer has an operating ...
  • Gezelius, K.; Driscoll, Michael J. ;; Hejzlar, Pavel (Massachusetts Institute of Technology. Center for Advanced Nuclear Energy Systems. Advanced Nuclear Power Program, 2004-05)
    Two aspects of an intermediate heat exchanger (IHX) for GFR service have been investigated: (1) the intrinsic characteristics of the proposed compact printed circuit heat exchanger (PCHE); and (2) a specific design ...
  • Romano, Paul Kollath; Newton, Thomas H., Jr.; Forget, Benoit (Massachusetts Institute of Technology. Center for Advanced Nuclear Energy Systems. MIT Reactor Redesign Program, 2009-06-01)
    Pursuant to a 1986 NRC ruling, the MIT Reactor (MITR) is planning on converting from the use of highly enriched uranium (HEU) to low enriched uranium (LEU) for fuel. Prior studies have shown that the MITR will be able ...
  • Holcombe, Robert; Golay, Michael W. (Massachusetts Institute of Technology. Center for Advanced Nuclear Energy Systems. Nuclear Fuel Cycle Program, 2010-04)
    Nuclear Proliferation is a complex problem that has plagued national security strategists since the advent of the first nuclear weapons. As the cost to produce nuclear weapons has continued to decline and the availability ...
  • Bates, Ethan A.; Buongiorno, Jacopo; Driscoll, Michael J. (Massachusetts Institute of Technology. Center for Advanced Nuclear Energy Systems. Nuclear Fuel Cycle Program, 2011-06)
    Disposal of high-level nuclear waste in deep boreholes drilled into crystalline bedrock (i.e., “granite”) is an interesting repository alternative of long standing. Work at MIT over the past two decades, and more recently ...
  • Han, J. C.; Driscoll, M. J.; Todreas, N. E. (Massachusetts Institute of Technology. Center for Advanced Nuclear Energy Systems. Advanced Nuclear Power Program, 1989-09-30)
    The Reactor Cavity Cooling System (RCCS) is an essential passive safety feature of the Modular High Temperature Gas-Cooled Reactor (MHTGR). Its function is to assure the protection of both public safety and owner investment. ...
  • Truong, Bao Hoai; Hu, Lin-wen; Buongiorno, Jacopo; McKrell, Thomas J. (Massachusetts Institute of Technology. Center for Advanced Nuclear Energy Systems. Advanced Nuclear Power Program, 2011-06)
    Nanofluids, engineered colloidal dispersions of nanoparticles in fluid, have been shown to enhance pool and flow boiling CHF. The CHF enhancement was due to nanoparticle deposited on the heater surface, which was verified ...
  • Plumer, Kevin E.; Newton, Thomas H., Jr.; Forget, Benoit (Massachusetts Institute of Technology. Center for Advanced Nuclear Energy Systems. MIT Reactor Redesign Program, 2011-06-01)
    In accordance with a 1986 NRC ruling, the MIT Research Reactor (MITR) is planning on converting from the use of highly enriched uranium (HEU) to low enriched uranium (LEU) for fuel. A component of the conversion analysis ...
  • Wan, Yunzhi; Hu, Lin-Wen (Massachusetts Institute of Technology. Center for Advanced Nuclear Energy Systems. MIT Reactor Redesign Program, 2009-05-01)
    The MIT Research Reactor (MITR) is in the process of conducting a design study to convert from High Enrichment Uranium (HEU) fuel to Low Enrichment Uranium (LEU) fuel. The currently selected LEU fuel design contains 18 ...
  • Karahan, A.; Buongiorno, Jacopo; Kazimi, Mujid S. (Massachusetts Institute of Technology. Center for Advanced Nuclear Energy Systems. Nuclear Fuel Cycle Program, 2007-07)
    An evolutionary BWR fuel assembly design was studied as a means to increase the power density of current and future BWR cores. The new assembly concept is based on replacing four traditional assemblies and large water ...
  • Carpenter, David M.; Kohse, Gordon E. (Massachusetts Institute of Technology. Center for Advanced Nuclear Energy Systems. Nuclear Fuel Cycle Program, 2005-06)
    In order to obtain an accurate prediction of the thermal behavior of an annular fuel assembly (see MIT-NFC-PR-048 for a description of the rods), the thermal conduction of the region from the outside of the fuel capsule ...
MIT-Mirage