Advanced Search
DSpace@MIT

Browsing Mechanical Engineering - Bachelor's degree by Title

Research and Teaching Output of the MIT Community

Browsing Mechanical Engineering - Bachelor's degree by Title

Sort by: Order: Results:

  • Peña Doll, Mateo (Massachusetts Institute of Technology, 2014)
    An experimental study was performed to understand the correlation between printing parameters in the FDM 3D printing process, and the force required to remove a part from the build platform of a 3D printing using a patent ...
  • Jonnalagadda, Aparna S (Massachusetts Institute of Technology, 2005)
    Equipment and procedures were developed to test two passive microfluidic interconnect rings held together by the friction forces on the contact surfaces. The second design forms fluid seals by means of thin flared rings ...
  • Greene, Suzanne (Massachusetts Institute of Technology, 1984)
  • Gomez, Nicasio (Massachusetts Institute of Technology, 2005)
    A Positive Crankcase Ventilation, or PCV, valve is required by internal combustion engines in order to regulate the flow of blow-by gases out of the crankcase and into the intake air stream. Fluctuations in the pressure ...
  • Perkins, Garry Wayne (Massachusetts Institute of Technology, 1979)
  • Jain, Neera, S.B. Massachusetts Institute of Technology; Lee, Somin (Massachusetts Institute of Technology, 2006)
    Despite the problems with obesity that the United States is facing today, malnutrition, caused in part by severely low dietary fat consumption, remains a problem among many people living in Sub-Saharan Africa. According ...
  • Lee, Daipan (Massachusetts Institute of Technology, 2007)
    One of the causes of malnutrition among the rural inhabitants of Sub-Saharan Africa is the high cost of dietary fats that are necessary to maintain normal body functions. Though the Food and Agriculture Organization of the ...
  • Vu, My (My H.) (Massachusetts Institute of Technology, 2011)
    Statistically speaking, science, technology, and engineering are male dominated fields. Peluchi is a second-generation prototype of a programmable robotic toy targeted towards young girls in hope of promoting more interest ...
  • Hickey, Thomas R; Stephenson, Thomas I (Massachusetts Institute of Technology, 1945)
  • McKenna, Jay (Jay P.) (Massachusetts Institute of Technology, 2014)
    Overhead tasks such as those frequently found in aircraft manufacturing pose health risks to the workers due to the strain imposed on the shoulders. To reduce the risk of injury, a set of supernumerary robotic limbs (SRL) ...
  • Griswold, Aaron A. (Aaron Alexander), 1981- (Massachusetts Institute of Technology, 2004)
    A miniaturized bioreactor with a volume on the order of 100 [micro]l has been built with the aim of increasing the efficiency of the screening process for various microbial cultures. Unlike larger reactors currently in ...
  • Kubaczyk, Daniel Mark (Massachusetts Institute of Technology, 2011)
    An investigation was conducted to determine the methods and processes required for the manufacture of photographic objective lenses. Production of photographic lenses requires incredible precision in the melting, mixing, ...
  • Ray, Katherine Leung (Massachusetts Institute of Technology, 2010)
    In order to determine what type of photovoltaic solar cell could best be used in a thermoelectric photovoltaic hybrid power generator, we tested the change in efficiency due to higher temperatures of three types of solar ...
  • Humbert, Matthew S (Massachusetts Institute of Technology, 2008)
    Characterizing transient flow is not a trivial venture. It provides an excellent challenge for a senior mechanical engineering lab class. This project aimed at developing a new physical system for such a class based on the ...
  • Young, Brady W. (Brady William) (Massachusetts Institute of Technology, 2006)
    A motor and flywheel system was designed to simulate the dynamics of the electric drive train and inertial mass of a hybrid electric vehicle. The model will serve as a test bed for students in 2.672 to study the energy ...
  • Cantum, Cecilia G (Massachusetts Institute of Technology, 2013)
    The DARPA Robotic Challenge (DRC) required the development of user interface, perception, and planning and control modules for a robotic humanoid. This paper focuses on the planning and control component for the manipulation ...
  • Hatton, Ross L. (Ross Lawrence) (Massachusetts Institute of Technology, 2005)
    In this thesis, the limits of conventional linear actuators for long stroke applications are discussed, and tape-spring based actuators such as the STEM are introduced as an alternative solution. While the literature ...
  • Cho, Peter Sungil (Massachusetts Institute of Technology, 1997)
  • Kojimoto, Nigel (Nigel C.) (Massachusetts Institute of Technology, 2012)
    Pneumatic power is traditionally provided by compressed air contained in a pressurized vessel. This method of energy storage is analogous to an electrical capacitor. This study sought to create an alternative pneumatic ...
  • Chiloyan, Vazrik (Massachusetts Institute of Technology, 2011)
    Polymer fiber drawing creates fibers with enhanced thermal conductivity and strength compared to bulk polymer because drawing aligns the molecular chains. I optimize the polymer fiber drawing method in order to achieve ...
MIT-Mirage