Axially force limited grinding spindle for robotic grinding
Name
1080352503-MIT.pdf
Description
Full printable version
Size
8.33 MB
Format
Adobe PDF
Checksum (MD5)
e192d15fc7ecc6dc820c15e2b9145523
Author(s)
Brown, Austin (Austin R.)
Advisor(s)
Alexander H. Slocum.
Date Issued
2018
Publisher
Massachusetts Institute of Technology
Abstract
Grinding and Polishing of small parts is often easily performed by human hands, yet is challenging to automate. The grinding and polishing process is best done using a force-control scheme, which human hands perform naturally. Heavy robotic arms, which favor a position-control scheme, are difficult to control precisely, and trajectory errors can cause excessive grinding force which leads to burning of the part or destruction of the grinding wheel. Prior art of direct force control on a large robot arm requires the end-effector to have a 6-axis dynamometer, which is unwieldy, costly, and greatly limits the speed/precision of the process. We will discuss a new type of grinding spindle which is axially compliant, allowing the position-control robot arm to be used in a force-control nature. The spindle has a disjoint force-displacement curve, effectively operating in two modes: position-control mode at first, until a critical force is exceeded, when the spindle transitions into force-mode, keeping constant grinding force on the part though a certain range of travel. This limits the amount of force which can be imparted during grinding to a safe amount. The spindle is very simple and mechanically robust. We have built this hybrid position-force control spindle and tested it. The spindle was shown to perform correctly and successfully completed the test grind.
Description
Thesis: S.B., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2018.
Cataloged from PDF version of thesis.
Includes bibliographical references (page 35).
Subjects
Mechanical Engineering.
MIT Department
Massachusetts Institute of Technology. Department of Mechanical Engineering
Terms of Use
MIT theses are protected by copyright. They may be viewed, downloaded, or printed from this source but further reproduction or distribution in any format is prohibited without written permission.
Persistent DSpace Link