Repository logo
Log in(current)
Repository logoMIT Open ScholarshipDSpace@MIT
  1. Home
  2. MIT Open Access Articles
  3. MIT Open Access Articles
  4. Virus‐Templated Nickel Phosphide Nanofoams as Additive‐Free, Thin‐Film Li‐Ion Microbattery Anodes

Virus‐Templated Nickel Phosphide Nanofoams as Additive‐Free, Thin‐Film Li‐Ion Microbattery Anodes

Thumbnail Image
Download
Name

NixPy_manuscript_DSPACE.pdf

Description
Accepted version
Size

1.6 MB

Format

Adobe PDF

Checksum (MD5)

47a9c9831b4feae365bf3f004b9e838b

sword-2019-12-13T14:20:07.original.xml (130 B)
Original SWORD entry document
Author(s)
Records, William Christopher
•
Wei, Shuya
•
Belcher, Angela M
Date Issued
September 2019
Journal
Small
Publisher
Wiley
Citation
Records, William C. et al. "Virus‐Templated Nickel Phosphide Nanofoams as Additive‐Free, Thin‐Film Li‐Ion Microbattery Anodes." Small 15, 44 (September 2019): 1903166 © 2019 Wiley
Version
Author's final manuscript
Abstract
Transition metal phosphides are a new class of materials generating interest as alternative negative electrodes in lithium-ion batteries. However, metal phosphide syntheses remain underdeveloped in terms of simultaneous control over phase composition and 3D nanostructure. Herein, M13 bacteriophage is employed as a biological scaffold to develop 3D nickel phosphide nanofoams with control over a range of phase compositions and structural elements. Virus-templated Ni5P4 nanofoams are then integrated as thin-film negative electrodes in lithium-ion microbatteries, demonstrating a discharge capacity of 677 mAh g⁻¹ (677 mAh cm⁻³) and an 80% capacity retention over more than 100 cycles. This strong electrochemical performance is attributed to the virus-templated, nanostructured morphology, which remains electronically conductive throughout cycling, thereby sidestepping the need for conductive additives. When accounting for the mass of additional binder materials, virus-templated Ni₅P₄ nanofoams demonstrate the highest practical capacity reported thus far for Ni₅P₄ electrodes. Looking forward, this synthesis method is generalizable and can enable precise control over the 3D nanostructure and phase composition in other metal phosphides, such as cobalt and copper. Keywords: 3D nanostructure; transition metal phosphide; biotemplating; M13 bacteriophage; Li-ion microbattery
MIT Department
Massachusetts Institute of Technology. Department of Chemical Engineering
MIT Materials Research Laboratory
Massachusetts Institute of Technology. Department of Biological Engineering
Koch Institute for Integrative Cancer Research at MIT
Terms of Use
Creative Commons Attribution-Noncommercial-Share Alike
http://creativecommons.org/licenses/by-nc-sa/4.0/
Persistent DSpace Link
https://hdl.handle.net/1721.1/123308
DOI of Published Version
https://doi.org/10.1002/smll.201903166
Repository logo
PrivacyPermissionsAccessibilityContact us
Repository logo
Notify us about copyright concerns.