Inferences of hot electron preheat and its spatial distribution in OMEGA direct drive implosions
Name
22ja026_full.pdf
Size
1.81 MB
Format
Adobe PDF
Checksum (MD5)
da049829f4c0e802a34bf07866b8d8f5
Author(s)
Christopherson, A.R.
Betti, R.
Forrest, C.J.
Howard, J.
Theobald, W.
Campbell, E.M.
Delettrez, J.
Rosenberg, M.J.
Solodov, A.
Stoeckl, C.
Date Issued
January 2022
Journal
Physics of Plasmas
Publisher
AIP
Abstract
Hot electrons generated from laser plasma instabilities degrade performance of direct drive implosions by preheating the deuterium and tritium (DT) fuel resulting in early decompression and lower areal densities at stagnation. A technique to quantify the hot electron preheat of the dense DT fuel and connect it to the degradation in areal density is described in detail. Hot electrons are measured primarily from the hard x-rays they emit as they slow down in the target. The DT preheat is inferred from a comparison of the hard x-ray signals between a DT-layered implosion and its mass equivalent ablator only implosion. The preheat energy spatial distribution within the imploding shell is inferred from experiments using high Z payloads of varying thicknesses. It is found that the electrons deposit their energy uniformly throughout the shell material. For typical direct-drive OMEGA implosions driven with an overlapped intensity of ∼9·10^14 W/cm2, approximately ∼0.02%–0.03% of the laser energy is converted into preheat of the stagnated fuel which corresponds to areal density degradations of 10%–20%. The degradations in areal density explain some of the observed discrepancies between the simulated and measured areal densities.
Description
Submitted for publication in Physics of Plasmas
MIT Department
Massachusetts Institute of Technology. Plasma Science and Fusion Center
Persistent DSpace Link
DOI of Published Version
doi.org/10.1063/5.0091220
https://doi.org/10.1063/5.0091220
