Some modifications to the design of a parabolic solar concentrator for construction in Lesotho and their effects on power production
Name
62587057-MIT.pdf
Description
Full printable version
Size
1021.99 KB
Format
Adobe PDF
Checksum (MD5)
681dad0cb796dfada384ca1b2d0f145b
Author(s)
Ferreira, Toni (Toni Jolene)
Advisor(s)
Peter Griffith.
Date Issued
2005
Publisher
Massachusetts Institute of Technology
Abstract
An experimental study was performed to test the effectiveness of design modifications terms of efficiency and power production in an existing parabolic solar concentrator. The proposed modifications included limiting the number of parabolic ribs to be constructed to two, using struts of slotted angle iron to approximate a continuous parabolic trough, and increasing the thickness of the mirrored sheet metal to be formed to 0.035". A quarter-scale model of the system was constructed using materials and tools indigenous to Lesotho. The apparatus was tested for its ability to raise the temperature of a known amount of water in a specified amount of time. Results show that the system was capable of creating steam; however, the water in the system only reached an internal temperature of 81⁰C as opposed to the theoretical value of 467.01⁰C, which yields an error of 82.7%.
Description
Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2005.
Includes bibliographical references (leaf 15).
Subjects
Mechanical Engineering.
MIT Department
Massachusetts Institute of Technology. Department of Mechanical Engineering
Terms of Use
M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.
Persistent DSpace Link
