Filters with active tuning for power applications
Name
Phinney filters.pdf
Size
523.88 KB
Format
Adobe PDF
Checksum (MD5)
28ff6dfa570edcb2b5f167631a567494
Author(s)
Phinney, Joshua
Perreault, David J.
Date Issued
March 2003
Journal
IEEE Transactions on Power Electronics
Publisher
Institute of Electrical and Electronics Engineers (IEEE)
Citation
Phinney, J., and D.J. Perreault. “Filters with Active Tuning for Power Applications.” IEEE Trans. Power Electron. 18, no. 2 (March 2003): 636–647. © 2003 IEEE
Version
Final published version
Abstract
Filters for switched-mode power converters have traditionally relied on low-pass networks-with corner frequencies well below the ripple fundamental-to attenuate switching harmonics over a range of frequencies. The filters explored in this report provide extra attenuation at discrete frequencies, easing the filtering requirement of accompanying low-pass networks. When a converter's switching frequency is tuned to a filter resonance using a novel phase-lock control scheme, a resonant filter can match the ripple-attenuation performance of a low-pass network for less volume, weight, and expense. The design and application of resonant filters and active-tuning control are discussed, and experimental results from the input filter and power stage of a prototype DC-DC converter are presented.
MIT Department
Massachusetts Institute of Technology. Department of Electrical Engineering and Computer Science
Terms of Use
Article is made available in accordance with the publisher's policy and may be subject to US copyright law. Please refer to the publisher's site for terms of use.
Persistent DSpace Link
DOI of Published Version
https://doi.org/10.1109/TPEL.2003.809329
