Repository logo
Log in(current)
Repository logoMIT Open ScholarshipDSpace@MIT
  1. Home
  2. MIT Open Access Articles
  3. MIT Open Access Articles
  4. A novel semi-active TMD with folding variable stiffness spring

A novel semi-active TMD with folding variable stiffness spring

Thumbnail Image
Download
Name

11803_2014_Article_258.pdf

Size

875.91 KB

Format

Adobe PDF

Checksum (MD5)

a9b7c633ff55e0941456753548ecf460

Download all files submitted through automated deposit
art_7155360474528947386.zip (767.77 KB)
Author(s)
Rahimian, M.
•
Rafieipour, M. H.
•
Ghorbani-Tanha, A. K.
•
Mohammadi-Ghazi, Reza
Date Issued
September 2014
Journal
Earthquake Engineering and Engineering Vibration
Publisher
Institute of Engineering Mechanics, China Earthquake Administration
Citation
Rafieipour, M. H., A. K. Ghorbani-Tanha, M. Rahimian, and R. Mohammadi-Ghazi. “A Novel Semi-Active TMD with Folding Variable Stiffness Spring.” Earthq. Eng. Eng. Vib. 13, no. 3 (September 2014): 509–518.
Version
Author's final manuscript
Abstract
An innovative variable stiffness device is proposed and investigated based on numerical simulations. The device, called a folding variable stiffness spring (FVSS), can be widely used, especially in tuned mass dampers (TMDs) with adaptive stiffness. An important characteristic of FVSS is its capability to change the stiffness between lower and upper bounds through a small change of distance between its supports. This special feature results in lower time-lag errors and readjustment in shorter time intervals. The governing equations of the device are derived and simplified for a symmetrical FVSS with similar elements. This device is then used to control a single-degree-of-freedom (SDOF) structure as well as a multi-degree-of-freedom (MDOF) structure via a semi-active TMD. Numerical simulations are conducted to compare several control cases for these structures. To make it more realistic, a real direct current motor with its own limitations is simulated in addition to an ideal control case with no limitations and both the results are compared. It is shown that the proposed device can be effectively used to suppress undesirable vibrations of a structure and considerably improves the performance of the controller compared to a passive device.
MIT Department
Massachusetts Institute of Technology. Department of Civil and Environmental Engineering
Terms of Use
Article is made available in accordance with the publisher's policy and may be subject to US copyright law. Please refer to the publisher's site for terms of use.
Persistent DSpace Link
http://hdl.handle.net/1721.1/104008
DOI of Published Version
https://doi.org/10.1007/s11803-014-0258-5
Repository logo
PrivacyPermissionsAccessibilityContact us
Repository logo
Notify us about copyright concerns.