Development of a force-feedback laparoscopic surgery simulator
Name
47088054-MIT.pdf
Description
Full printable version
Size
12.99 MB
Format
Adobe PDF
Checksum (MD5)
d897eaf27bd9ba26cdb17ce2a9565530
Author(s)
Ben-Ur, Ela
Advisor(s)
J. Kenneth Salisbury, Jr.
Date Issued
1999
Publisher
Massachusetts Institute of Technology
Abstract
The work presented here addressed the development of an electro-mechanical force-feedback device to provide more realistic and complete sensations to a laparoscopic surgery simulator than currently available. A survey of the issues surrounding haptic (touch) displays and training for laparoscopic or "keyhole" procedures was performed. A number of primary and secondary sources including surgeon consultation , operating room observations, and task analyses were used to accumulate a list of needs. Subsequent requirements analysis translated these into a set of specifications for the kinematics, dynamics and actuators, and configuration of the device. These suggested a design with five actuated axes (pitch and yaw about the entrance to the abdomen, insertion, rotation about the tool axis, and gripper feedback) amenable to a configuration including two actuated tools in a lifelike torso. These specifications were the basis for the generation and selection of design concepts. The PHANTOM haptic interface from Sensable Devices was chosen from among a number of existing devices and original designs to actuate the pitch, yaw, and insertion degrees of freedom. A separate end effector actuator was specified to supply feedback to the handle rotation and gripper. Mechanisms were proposed for each of these axes; a linear cable capstan was selected for the gripper and a cable capstan/drum for the rotation. The kinematics, bearings, transmissions, and user interface for both axes were designed in detail, and first- and second generation prototypes were built. The finished devices were integrated with the PHANTOM hardware, electronics, and software. Performance and design evaluations were performed, and plans for future device improvements and user studies were outlined.
Description
Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 1999.
Includes bibliographical references (p. 77-78).
Subjects
Mechanical Engineering.
MIT Department
Massachusetts Institute of Technology. Department of Mechanical Engineering
Terms of Use
M.I.T. theses are protected by
copyright. They may be viewed from this source for any purpose, but
reproduction or distribution in any format is prohibited without written
permission. See provided URL for inquiries about permission.
copyright. They may be viewed from this source for any purpose, but
reproduction or distribution in any format is prohibited without written
permission. See provided URL for inquiries about permission.
Persistent DSpace Link
