Repository logo
Log in(current)
Repository logoMIT Open ScholarshipDSpace@MIT
  1. Home
  2. MIT Open Access Articles
  3. MIT Open Access Articles
  4. Microstructured Ceramic-Coated Carbon Nanotube Surfaces for High Heat Flux Pool Boiling

Microstructured Ceramic-Coated Carbon Nanotube Surfaces for High Heat Flux Pool Boiling

Thumbnail Image
Download
Name

acsanm.9b01116.pdf

Size

5.02 MB

Format

Adobe PDF

Checksum (MD5)

3b00fb7b2e852f1ca171cc40f14985c4

Author(s)
Zhao, Hangbo
•
Dash, Susmita
•
Dhillon, Navdeep Singh
•
Kim, Sanha
•
Lettiere, Bethany
•
Varanasi, Kripa K.
•
Hart, A. John
Date Issued
August 2019
Journal
ACS Applied Nano Materials
Publisher
American Chemical Society (ACS)
Citation
Zhao, Hangbo et al. "Microstructured Ceramic-Coated Carbon Nanotube Surfaces for High Heat Flux Pool Boiling." ACS Applied Nano Materials 2, 9 (September 2019): 5538-5545 © 2019 American Chemical Society
Version
Final published version
Abstract
Stable surfaces with high boiling heat flux are critical to many thermal and energy conversion systems, and it is well-known that the microscale texture and wettability of a surface influences its critical heat flux (CHF). We investigate pool boiling on microstructured ceramic-coated carbon nanotube (CNT) surfaces. CNT microstructures are patterned with precise dimensions over large areas, and a ceramic coating by atomic layer deposition (ALD) imparts stability in the presence of capillary forces and thermal stresses that occur during boiling, achieving a measured CHF as high as 245 W cm–2. We also show that the nanoporosity of the ceramic–CNT microstructures has a negligible influence on the CHF because surface rewetting is dominated by microscale imbibition. The high CHF values achieved on our surfaces are attributed to the micropatterning and the nanoscale surface texture of the CNTs, which accelerate liquid imbibition upon bubble departure. Our findings also suggest further enhancements in CHF can be made by optimizing the microstructure pattern and improving its wettability. Therefore, micropatterned ceramic−CNT composites are a potentially attractive substrate for industrial applications of pool boiling.
MIT Department
Massachusetts Institute of Technology. Department of Mechanical Engineering
Terms of Use
Creative Commons Attribution-NonCommercial-NoDerivs License
http://creativecommons.org/licenses/by-nc-nd/4.0/
Persistent DSpace Link
https://hdl.handle.net/1721.1/124992
DOI of Published Version
https://doi.org/10.1021/acsanm.9b01116
Repository logo
PrivacyPermissionsAccessibilityContact us
Repository logo
Notify us about copyright concerns.