A high aspect-ratio silicon substrate-via technology and applications
Name
48253155-MIT.pdf
Description
Full printable version
Size
11.83 MB
Format
Adobe PDF
Checksum (MD5)
daf35e1b4eb6b8350e7779471aff3bbd
Author(s)
Wu, Joyce H. (Joyce Hsia-Sing), 1974-
Advisor(s)
Jesús A. del Alamo.
Date Issued
2000
Publisher
Massachusetts Institute of Technology
Abstract
Substrate vias are widely used in GaAs microwave and millimeter-wave ICs to provide low impedance ground connections. As silicon RFICs strive for high-frequency operation, it becomes increasingly important to reduce all extrinsic parasitics. Of particular concern is the MOSFET source or BJT emitter impedance, which greatly affects the gain of RF amplifiers. To address this, we have developed a through-wafer via technology for silicon, which allows the implementation of high-aspect ratio, low-impedance ground connections. The fabrication of these vias involves three main steps: (1) anisotropic DRIE to etch the vias, (2) PECVD silicon nitride deposition to form an insulating, barrier liner, and (3) copper electroplating to fill the via. Since our vias incorporate an insulating liner, this through-wafer via technology could also be used to distribute power and ground in logic circuits and MEMS. We have demonstrated vias with an aspect ratio as high as 14:1 and an inductance that approaches the theoretically expected value. Our via technology can also be exploited to reduce crosstalk and improve subsystem isolation in RF System-on-a-Chip applications. High crosstalk immunity is critical to enable one-chip systems integrating noisy logic with sensitive low-noise amplifier and analog circuitry. Using our substrate-via technology, we have implemented a novel Faraday cage isolation scheme that is successful in suppressing crosstalk by over 20 dB at 1 GHz at a distance of 100 [mu]m.
Description
Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2000.
Includes bibliographical references (p. 85-90).
Subjects
Electrical Engineering and Computer Science.
MIT Department
Massachusetts Institute of Technology. Department of Electrical Engineering and Computer Science
Terms of Use
M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.
Persistent DSpace Link
