Effect of Fungal Deterioration on Physical and Mechanical Properties of Hemp and Flax Natural Fiber Composites
Name
materials-10-01252.pdf
Size
6.7 MB
Format
Adobe PDF
Checksum (MD5)
4f2262bcf0365b3c69ab1318977c1454
Author(s) • • • • • • • •
Crawford, Bryn
Kazemian, Negin
Klironomos, John
Stoeffler, Karen
Rho, Denis
Denault, Johanne
Milani, Abbas S.
Milani, Abbas
Pakpour, Sepideh
Date Issued
October 2017
Journal
Materials
Publisher
Multidisciplinary Digital Publishing Institute (MDPI)
Citation
Crawford, Bryn et al. "Effect of Fungal Deterioration on Physical and Mechanical Properties of Hemp and Flax Natural Fiber Composites." Materials 10, 11 (October 2017): 1252 © 2017 The Authors
Version
Final published version
Abstract
The development and application of bio-sourced composites have been gaining wide attention, yet their deterioration due to the growth of ubiquitous microorganisms during storage/manufacturing/in-service phases is still not fully understood for optimum material selection and design purposes. In this study, samples of non-woven flax fibers, hemp fibers, and mats made of co-mingled randomly-oriented flax or hemp fiber (50%) and polypropylene fiber (50%) were subjected to 28 days of exposure to (i) no water-no fungi, (ii) water only and (iii) water along with the Chaetomium globosum fungus. Biocomposite samples were measured for weight loss over time, to observe the rate of fungal growth and the respiration of cellulose components in the fibers. Tensile testing was conducted to measure mechanical properties of the composite samples under different configurations. Scanning electron microscopy was employed to visualize fungal hyphal growth on the natural fibers, as well as to observe the fracture planes and failure modes of the biocomposite samples. Results showed that fungal growth significantly affects the dry mass as well as the tensile elastic modulus of the tested natural fiber mats and composites, and the effect depends on both the type and the length scale of fibers, as well as the exposure condition and time. Keywords: biocomposites; hemp and flax natural fibers; fungal deterioration; material properties; design considerations
MIT Department
Massachusetts Institute of Technology. Department of Biological Engineering
Terms of Use
Creative Commons Attribution
Persistent DSpace Link
DOI of Published Version
https://doi.org/10.3390/ma10111252