Design and characterization of acoustic pulse shape memory alloy actuators
Name
61522803-MIT.pdf
Description
Full printable version
Size
17.76 MB
Format
Adobe PDF
Checksum (MD5)
cf61be0693e2c59a4c70ffc720651467
Author(s)
Chambers, Joshua Michael
Advisor(s)
Steven R. Hall.
Date Issued
2005
Publisher
Massachusetts Institute of Technology
Abstract
Single crystal Ni-Mn-Ga ferromagnetic shape memory alloys (FSMAs) are active materials which produce strain when a magnetic field is applied. The large saturation strain (6%) of Ni-Mn-Ga, and material energy density comparable to piezoelectric ceramics make Ni- Mn-Ga an interesting active material. However, their usefulness is limited by the bulky electromagnet required to produce a magnetic field. In this thesis, a novel actuation method is developed for shape memory alloys in their martensitic phase, whereby asymmetric acoustic pulses are used to drive twin boundary motion. Experimental actuators were developed using a combination of Ni-Mn-Ga FSMA single crystals and a piezoelectric stack actuator. In bi-directional actuation without load, strains of over 3% were achieved using repeated pulses (at 100 Hz) over a 30 s interval, while 1% strain was achieved in under 1 s. The maximum strains achieved are comparable to the strains achieved using bi-directional magnetic actuation, although the time required for actuation is longer. No-load actuation also showed a nearly linear relationship between the magnitude of the asymmetric stress pulse and the strain achieved during actuation, and a positive correlation between pulse repetition rate and output strain rate, up to at least 100 Hz. Acoustic actuation against a spring load showed a maximum output energy density for the actuator of about 1000 J/m³, with a peak-to-peak stress and strain of 100 kPa and 2%, respectively.
Description
Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2005.
Includes bibliographical references (p. 175-177).
Subjects
Mechanical Engineering.
MIT Department
Massachusetts Institute of Technology. Department of Mechanical Engineering
Terms of Use
M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.
Persistent DSpace Link
