Phase projection using three satellites
Name
192001895-MIT.pdf
Description
Full printable version
Size
8.88 MB
Format
Adobe PDF
Checksum (MD5)
8bfd141b966d077aed197a801d63e9b4
Author(s)
Yeung, Michael C. (Michael Chi-Hang)
Advisor(s)
Jin Au Kong and Bae-Ian Wu.
Alternative Title
Phase projection using 3 satellites
Date Issued
2007
Publisher
Massachusetts Institute of Technology
Abstract
This study seeks to investigate various techniques used in Interferometric Synthetic Aperture Radar (InSAR) during the phase unwrapping process and the noise filtering step. In particular, as intuition would follow, we establish that the advantage of using three satellites over using just two in noise reduction means that using three satellites should be the way to go in all future work. In addition, this thesis does some in-depth investigation into the effectiveness of the following phase unwrapping methods: weighted least-squares phase unwrapping, branch-cut, and MAP dynamic programming phase unwrapping. The weighted least-squares unwrapping utilizes residues, which are points of inconsistencies on the interferogram, as a guide to assign weights when doing the weighting before the actual unwrapping step. Results show that weighted least square unwrapping fares the best in terms of mean RMS height error. We also introduce the notion of 2-D and 3-D Projection in our search for a simple, elegant solution to further reduce noise during our InSAR post-processing steps. 2-D Projection is shown to be a special case of 3-D Projection, and both require the presence of at least 3 satellites. Projection in general reduces noise in the system by utilizing the information provided by the configuration of the satellites to reduce the set of allowed phase points, thereby improving the robustness of the system to noise. Our results show that, for almost all cases, whether in the extremely small baseline distance or non-integer baseline ratios, using 3-D Projection gives much better results. Results are entirely simulation based, using the engineering tool MATLAB Version 7.0 developed by Mathworks. Root-mean-square errors will be used as the metric for comparison for most cases.
Description
Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2007.
Includes bibliographical references (p. 92-95).
Subjects
Electrical Engineering and Computer Science.
MIT Department
Massachusetts Institute of Technology. Department of Electrical Engineering and Computer Science
Terms of Use
M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.
Persistent DSpace Link
