Synthesis and analysis of a microcellular plastics extrusion system for insulation of fine wires
Name
42916779-MIT.pdf
Description
Full printable version
Size
19.69 MB
Format
Adobe PDF
Checksum (MD5)
4c59774f40af5f92b0c0295433280494
Author(s)
Sanyal, Yoddhojit, 1969-
Advisor(s)
Nam P. Suh.
Date Issued
1998
Publisher
Massachusetts Institute of Technology
Abstract
This thesis deals with analytical and experimental work performed on the extrusion of microcellular plastics with cell sizes of 20 microns or less and cell densities of about a billion cells per cm3. An analytical model of cell nucleation and cell growth during extrusion was developed. This model predicts the nucleation rate by taking into account Gibbs free energy change due to phase separation, as well as surface energy, in binary systems (such as polymer/gas mixtures). The cell growth kinetics during extrusion is also studied under some limiting cases. The analysis shows that due to the simultaneous occurrence of cell nucleation and cell growth during extrusion, these two phenomena are coupled and compete with each other for the gas dissolved in the polymer. With the aid of this model the important extrusion parameters affecting the microstructure of the foam were identified. An order-of-magnitude prediction of cell size, cell density and foam void fraction were made based on realistic numerical values of these parameters. The next phase of the project consisted of using the analytical model and Axiomatic Design Theory to design a tandem extrusion system for wire coating. Satisfaction of the Independence Axiom showed that the process was controllable. Preliminary analysis of the Information Axiom indicated that the system would be stable. Experiments were performed over a range of conditions to determine their effects on the final wire insulation diameter and capacitance. The experimental results were compared to the analytical predictions to further verify the validity of the model as well as to determine its limitations.
Description
Thesis (Sc.D.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 1998.
Includes bibliographical references (leaves 138-140).
Subjects
Mechanical Engineering
MIT Department
Massachusetts Institute of Technology. Department of Mechanical Engineering
Terms of Use
M.I.T. theses are protected by
copyright. They may be viewed from this source for any purpose, but
reproduction or distribution in any format is prohibited without written
permission. See provided URL for inquiries about permission.
copyright. They may be viewed from this source for any purpose, but
reproduction or distribution in any format is prohibited without written
permission. See provided URL for inquiries about permission.
Persistent DSpace Link
