New turbulence models for indoor airflow simulation
Name
40155197-MIT.pdf
Description
Full printable version
Size
10.24 MB
Format
Adobe PDF
Checksum (MD5)
fb7c1b1d345b3107ddb393b624dd33a4
Author(s)
Xu, Weiran, 1968-
Advisor(s)
Qingyan Chen.
Date Issued
1998
Publisher
Massachusetts Institute of Technology
Abstract
It is important to predict indoor environment in order to design thermally comfortable and healthy indoor spaces. Heating, Ventilating and Air Conditioning (HVAC) design engineers and architects widely use the Computational Fluid Dynamics (CFD) technique for indoor environment predictions. The CFD technique requires a turbulence model to correctly calculate indoor air distribution. However, the currently available turbulence models in the literature are either inaccurate or inefficient for the indoor environment predictions. To solve the problem, this thesis proposes two two-layer turbulence models and a zero-equation turbulence model. The two-layer models use a one-equation (k) model for the near wall region and the "standard" k -£ model in the outer region. The zero-equation model calculates turbulent viscosity based on local velocity and a length-scale. The near wall models have been developed with the aid of the data of natural and forced convection flows by Direct Numerical Simulation (DNS), while the zero-equation model has been proposed empirically. One of the two-layer turbulence models is used for predicting natural convection in rooms. The other two-layer model and the zero-equation model can be used to predict forced, natural, and mixed convection in rooms. These three new models have been applied to predict different types of indoor airflows. The corresponding DNS or experimental data were used to validate the models. This study concludes that the two-layer models can predict airflows most accurately, better than many k -E models. The computing cost is significantly lower than that of the low Reynolds number k-E models and is only slightly higher than that of the "standard" k-E models. The zero-equation model is at least ten times faster than the "standard" k-E model and it is numerically stable and can predict indoor airflow with acceptable accuracy.
Description
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Architecture, 1998.
Includes bibliographical references (p. 157-165).
Subjects
Architecture
MIT Department
Massachusetts Institute of Technology. Department of Architecture
Terms of Use
M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.
Persistent DSpace Link
