Repository logo
Log in(current)
Repository logoMIT Open ScholarshipDSpace@MIT
  1. Home
  2. MIT Libraries
  3. MIT Theses
  4. Graduate Theses
  5. Propulsion considerations for supersonic oblique flying wings

Propulsion considerations for supersonic oblique flying wings

Thumbnail Image
Download
Name

73828808-MIT.pdf

Description
Full printable version
Size

12.74 MB

Format

Adobe PDF

Checksum (MD5)

1bba745ea73287639c82507c6a867809

Author(s)
Shinagawa, Yuto
Advisor(s)
Alan H. Epstein.
Date Issued
2006
Publisher
Massachusetts Institute of Technology
Abstract
Propulsion considerations unique to the supersonic oblique flying wing, including cycle selection, sizing, and integration were investigated via the development and interrogation of aerodynamic and propulsive synthesis models. These models were an amalgamation of computational tools (MSES), linearized theory, parametric estimation, and quasi D thermodynamic cycle analysis. Lift-to-drag ratio, thrust specific fuel consumption, and nacelle wave drag were examined as intermediate figures of merit that would ultimately impact the final performance metric-namely, range parameter and specific excess power. It was found that higher bypass ratio engines could yield an increase in the range parameter up until a critical mach number, above which the increasing nacelle drag would offset the TSFC reductions to yield a net degradation in range performance. Between the baseline TF30-type cycle and its BPR 2.4 modified variant, this critical mach number was found to be at approximately M 2.0 for TT4/TT2 = 5, and M 2.2 for TT4/TT2 = 6.
(cont.) The OFW whose engine was sized for supersonic cruise was also found to have less excess power throughout the low speed regime and hence, longer climb and acceleration times than a comparable symmetric-wing supersonic aircraft. It was concluded that the OFW's reduced drag at supersonic cruise mitigates the gross oversizing of the engine that is common and inevitable for conventional supersonic aircraft at takeoff. Preliminary investigation of the turntable-mounted engine and slot-inlet have demonstrated their feasibility as viable engine integration concepts, but has also revealed the need for integrated design solutions, such as the development of a novel flat-top airfoil, aggressive S-ducts, and in general, a highly compact engine.
Description
Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Aeronautics and Astronautics, 2006.
Includes bibliographical references (p. 111-113).
Subjects
Aeronautics and Astronautics.
MIT Department
Massachusetts Institute of Technology. Department of Aeronautics and Astronautics
Terms of Use
M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.
http://dspace.mit.edu/handle/1721.1/7582
Persistent DSpace Link
http://hdl.handle.net/1721.1/35565
Repository logo
PrivacyPermissionsAccessibilityContact us
Repository logo
Notify us about copyright concerns.