Design of a Thermally-Actuated Gas Lift Safety Valve
Name
Hover_Design of a thermally.pdf
Size
1014.69 KB
Format
Adobe PDF
Checksum (MD5)
3a1fdf3c9b0d5f4fdc64e16ab296f481
Author(s)
Gilbertson, Eric W.
Hover, Franz S.
Arellano, Jose
Freeman, Bryan
Date Issued
June 2011
Journal
Proceedings of the ASME 2011 30th International Conference on Ocean, Offshore and Arctic Engineering
Publisher
ASME International
Citation
Gilbertson, Eric et al. “Design of a Thermally-Actuated Gas Lift Safety Valve.” Proceedings of the ASME 2011 30th International Conference on Ocean, Offshore and Arctic Engineering, 2011. 675–684.
Version
Author's final manuscript
Abstract
Gas-lifted oil wells are susceptible to failure through malfunction of gas lift valve assemblies (GLV). One failure mode occurs when the GLV check valve fails and product passes into the well annulus, potentially reaching the wellhead. This is a growing concern as offshore wells are drilled thousands of meters below the ocean floor in extreme temperature and pressure conditions, and repair and monitoring become difficult. Currently no safeguard exists in the GLV to prevent product passage in the event of check valve failure. In this paper a design and operational procedures are proposed for a thermally-actuated positive-locking safety valve to seal the GLV in the event of check valve failure. A thermal model of the well and GLV system is developed and compared to well data to verify feasibility of a thermally-actuated safety valve. A 3× scale prototype safety valve is built and tested under simulated failure scenarios and well start-up scenarios. Realistic well temperatures in the range of 20C to 70C are used. Results demonstrate valve closure in response to simulated check valve failure and valve opening during simulated well start-up.
MIT Department
Massachusetts Institute of Technology. Department of Mechanical Engineering
Terms of Use
Creative Commons Attribution-Noncommercial-Share Alike 3.0
Persistent DSpace Link
DOI of Published Version
https://doi.org/10.1115/OMAE2011-49927
