A 58 nW ECG ASIC With Motion-Tolerant Heartbeat Timing Extraction for Wearable Cardiovascular Monitoring
Name
DH_TBCAS2014.pdf
Size
1.61 MB
Format
Adobe PDF
Checksum (MD5)
419b7a09d52adf4b21f12eceef6553e5
Author(s) •
He, David Da
Sodini, Charles G.
Date Issued
May 2015
Journal
IEEE Transactions on Biomedical Circuits and Systems
Publisher
Institute of Electrical and Electronics Engineers (IEEE)
Citation
He, David Da, and Charles G. Sodini. “A 58 nW ECG ASIC With Motion-Tolerant Heartbeat Timing Extraction for Wearable Cardiovascular Monitoring.” IEEE Transactions on Biomedical Circuits and Systems 9, no. 3 (June 2015): 370–376.
Version
Author's final manuscript
Abstract
An ASIC for wearable cardiovascular monitoring is implemented using a topology that takes advantage of the electrocardiogram's (ECG) waveform to replace the traditional ECG instrumentation amplifier, ADC, and signal processor with a single chip solution. The ASIC can extract heartbeat timings in the presence of baseline drift, muscle artifact, and signal clipping. The circuit can operate with ECGs ranging from the chest location to remote locations where the ECG magnitude is as low as 30 μV. Besides heartbeat detection, a midpoint estimation method can accurately extract the ECG R-wave timing, enabling the calculations of heart rate variability. With 58 nW of power consumption at 0.8 V supply voltage and 0.76 mm[superscript 2] of active die area in standard 0.18 μm CMOS technology, the ECG ASIC is sufficiently low power and compact to be suitable for long term and wearable cardiovascular monitoring applications under stringent battery and size constraints.
MIT Department
Massachusetts Institute of Technology. Department of Electrical Engineering and Computer Science
Terms of Use
Creative Commons Attribution-Noncommercial-Share Alike
Persistent DSpace Link
DOI of Published Version
https://doi.org/10.1109/TBCAS.2014.2346761