Comparing Well and Geophysical Data for Temperature Monitoring Within a Bayesian Experimental Design Framework
Name
Water Resources Research - 2022 - Thibaut - Comparing Well and Geophysical Data for Temperature Monitoring Within a.pdf
Description
Published version
Size
3.93 MB
Format
Adobe PDF
Checksum (MD5)
7b31a476aa53662f50a16d9d4ad11431
Author(s) • • • • •
Thibaut, Robin
Compaire, Nicolas
Lesparre, Nolwenn
Ramgraber, Maximilian
Laloy, Eric
Hermans, Thomas
Date Issued
October 19, 2022
Journal
Water Resources Research
Publisher
American Geophysical Union
Citation
Thibaut, R., Compaire, N., Lesparre, N., Ramgraber, M., Laloy, E., & Hermans, T. (2022). Comparing well and geophysical data for temperature monitoring within a Bayesian experimental design framework. Water Resources Research, 58, e2022WR033045.
Version
Final published version
Abstract
Temperature logs are an important tool in the geothermal industry. Temperature measurements from boreholes are used for exploration, system design, and monitoring. The number of observations, however, is not always sufficient to fully determine the temperature field or explore the entire parameter space of interest. Drilling in the best locations is still difficult and expensive. It is therefore critical to optimize the number and location of boreholes. Due to its higher spatial resolution and lower cost, four‐dimensional (4D) temperature field monitoring via time‐lapse Electrical Resistivity Tomography has been investigated as a potential alternative. We use Bayesian Evidential Learning (BEL), a Monte Carlo‐based training approach, to optimize the design of a 4D temperature field monitoring experiment. We demonstrate how BEL can take into account various data source combinations (temperature logs combined with geophysical data) in the Bayesian optimal experimental design (BOED). To determine the optimal data source combination, we use the Root Mean Squared Error of the predicted target in the low dimensional latent space where BEL is solving the prediction problem. The parameter estimates are accurate enough to use in BOED. Furthermore, the method is not limited to monitoring temperature fields and can be applied to other similar experimental design problems. The method is computationally efficient and requires little training data. For the considered optimal design problem, a training set of only 200 samples and a test set of 50 samples is sufficient.
MIT Department
Massachusetts Institute of Technology. Department of Aeronautics and Astronautics
Terms of Use
Article is made available in accordance with the publisher's policy and may be subject to US copyright law. Please refer to the publisher's site for terms of use.
Persistent DSpace Link
DOI of Published Version
https://doi.org/10.1029/2022wr033045