Magnetoresistive Random Access Memory (MRAM) technology : current advancement and future development
Name
1126335286-MIT.pdf
Size
15.27 MB
Format
Adobe PDF
Checksum (MD5)
146d9f84c098a51b62b9e50c3d62640d
Author(s)
Lnu, Shimon.
Advisor(s)
Caroline A. Ross.
Date Issued
2010
Publisher
Massachusetts Institute of Technology
Abstract
Ability to store data is one of the key utilities in modern computer. The memory industry grows as demand for denser, smaller, cheaper and faster memory device increases. The term memory has been used widely in computing jargon to refer to random access memory (RAM). RAMs are built with steady improvement over the years owing to semiconductor integrated circuit (IC) technology. However, RAMs are still struggling to achieve all aspect of the paramount design intended for memory device: non-volatile (including radiation hardness and materials stability), dense, fast, low power consumption, low cost, IC technology compatible and read/write (R/W) endurance. Magnetoresistive RAM (MRAM) offers such possibility. MRAM has just entered in 2002 with 128kbit product, but it has improved to reach 16 Mbit density in the year 2009, that makes a 128 density multiplication in 7 years. The prototyping has gone through an even higher density at 64 Mbit in 2010, along with optimistic view of reaching Gbit density in the near future by the introduction of spin-torque-transfer MRAM. A close look at the presented MRAM cost model, the cost of 64 and 128Mbit module can go as low as 4.4-4.9 cents/Mbit and 2.8-3.0 cents/Mbit respectively. Comparing to similar density (64 or 128 Mbit) DRAM product - around 1993-1996, DRAM pricing is revolving around $1/Mbit, which makes MRAM a cost competitive product with respect to DRAM or other memories. Evidently, MRAM cost looks promising to compete with superior memory products such as DRAM and Flash, while on its way, it will replace the first few market penetration areas such as embedded memory and SOC circuit for mobile/automotive application.
Description
Thesis: M. Eng., Massachusetts Institute of Technology, Department of Materials Science and Engineering, 2010
Cataloged from PDF version of thesis.
Includes bibliographical references (pages 80-85).
Subjects
Materials Science and Engineering.
MIT Department
Massachusetts Institute of Technology. Department of Materials Science and Engineering
Terms of Use
MIT theses are protected by copyright. They may be viewed, downloaded, or printed from this source but further reproduction or distribution in any format is prohibited without written permission.
Persistent DSpace Link
