Mechanical design of a contra-rotating propeller assembly for a small underwater ROV
Name
77538687-MIT.pdf
Description
Full printable version
Size
2.02 MB
Format
Adobe PDF
Checksum (MD5)
7608d6d3a54f0b8f4d138ff76b59b0f4
Author(s)
Stefanov-Wagner, Thaddeus (Thaddeus J.)
Advisor(s)
Franz Hover.
Date Issued
2006
Publisher
Massachusetts Institute of Technology
Abstract
A project was undertaken to design and build a contra-rotating propeller assembly for a small underwater remotely operated vehicle (ROV), with the intent of commissioning a production run at a later time. The desired production rate was greater than one assembly per seven hour day with one machinist, at a material cost of less than $600 per assembly. Lastly, the design had to be compatible with the propeller design work being done concurrently by J. Stanway. The specified goals were met. The material cost of each assembly was $496.02 at the time of manufacture. In the production run, the incremental time for making each assembly was under 5 hours, giving a large margin for overhead and work interruptions.
Description
Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2006.
Includes bibliographical references (leaf 29).
Subjects
Mechanical Engineering.
MIT Department
Massachusetts Institute of Technology. Department of Mechanical Engineering
Terms of Use
M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.
Persistent DSpace Link
