Modeling the operating voltage of liquid metal battery cells
Name
890128566-MIT.pdf
Description
Full printable version
Size
6.94 MB
Format
Adobe PDF
Checksum (MD5)
696ba5b717dd95a0ee8837fb7f6a23f7
Author(s)
Newhouse, Jocelyn Marie
Advisor(s)
Donald R. Sadoway.
Date Issued
2014
Publisher
Massachusetts Institute of Technology
Abstract
A one-dimensional, integrative model of the voltage during liquid metal battery operation has been developed to enhance the understanding of performance at the cell level. Two liquid metal batteries were studied: Mg-Sb for initial development of the model and Li-Bi for demonstration of generality. The baseline of the model is the thermodynamic potential, which is the maximum potential upon discharge. Emf measurements were used to confirm the literature values for Mg-Sb liquid alloys and calibrate a two-phase Mg-Sb reference electrode. The charge transfer kinetics at the alloying electrode were studied using the galvanostatic pulse method and a novel working electrode design. The contribution of the charge transfer reaction to the cell operation was found to be negligible for both the Mg-Sb and Li-Bi electrodes (less than 5 mV). Mass transport in the positive electrode was examined and found to depend significantly on the concentration dependence of the interdiffusivity and the volume change with alloying. The interdiffusivities for both Mg-Sb and Li-Bi were measured. A semi-analytical expression was proposed and agreed with the numerical solution determined using the finite difference method. Mass transport in the electrolyte was modeled using a boundary layer diffusion approximation. For the IR drop, the solution resistance was assumed to be constant. The predicted operating voltage for both the Mg-Sb and Li-Bi was consistent with experimental data.
Description
Thesis: Ph. D., Massachusetts Institute of Technology, Department of Materials Science and Engineering, 2014.
This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.
Cataloged from student-submitted PDF version of thesis.
Includes bibliographical references (pages 179-188).
Subjects
Materials Science and Engineering.
MIT Department
Massachusetts Institute of Technology. Department of Materials Science and Engineering
Terms of Use
M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.
Persistent DSpace Link
