Areas of contact and pressure distribution in bolted joints
Name
HTL_TR_1970_068.pdf
Size
6.75 MB
Format
Adobe PDF
Checksum (MD5)
ccee2c3739b675d064bc5fdf0c0ba096
Author(s) •
Gould, Herbert Hirsch
Mikic, B. B.
Date Issued
1970
Publisher
Cambridge, Mass. : M.I.T. Engineering Projects Laboratory, [1970]
Series/Report no.
Technical report (Massachusetts Institute of Technology, Heat Transfer Laboratory) ; no. 68.
Abstract
When two plates are bolted (or riveted) together these will be in contact in the immediate vicinity of the bolt heads and separated beyond it. The pressure distribution and size of the contact zone is of considerable interest in the study of heat transfer across bolted joints. The pressure distributions in the contact zones and the radii at which flat and smooth axisymmetric, linear elastic plates will separate were computed for several thicknesses as a function of the configuration of the bolt load by the finite element method. The radii of separation were also measured by two experimental methods. One method employed autoradiographic techniques. The other method measured the polished area around the bolt hole of the plate's caused by sliding under load in the contact zone. The sliding was produced by rotating one plate of a mated pair relative to the other plate with the bolt force acting. The computational and experimental results are in agreement and these-yield smaller zones of contact than indicated by the literature. It is shown that the discrepancy is due to an assumption made in the previous analyses. In addition to the above results this report contains the finite element and heat transfer computer programs used in this study. Instructions for the use of these programs are also included.
Subjects
Joints (Engineering)
Surfaces (Technology)
Thermal stresses.
Heat -- Transmission.
Persistent DSpace Link