Mechanism and assessment of spin transfer torque (STT) based memory
Name
567626012-MIT.pdf
Description
Full printable version
Size
2.32 MB
Format
Adobe PDF
Checksum (MD5)
6ec29b56808c1d7ab24fe6d1679afaaf
Author(s)
Loh, Iong Ying
Advisor(s)
David I. Paul and Geoffrey Beach.
Date Issued
2009
Publisher
Massachusetts Institute of Technology
Abstract
When a sufficient current density passes through the MTJ, the spin-polarized current will exert a spin transfer torque to switch the magnetization of the free layer. This is the fundamental of the novel write mechanism in STT-RAM, current-induced magnetization switching. It allows STT-RAM to have a smaller cell size and write current than MRAM, and also capable of what MRAM promises: fast, dense, and non-volatile. A technological assessment was conducted to verify the claims of STT-RAM by understanding the physical principles behind it. A comparison of performance parameters in various memory technologies was also made. STT-RAM scores well in all aspect except in the size of the memory cell. The high current density (>10⁶ A/cm²) sets the lower limit of the size of the driving transistor and ultimately the cost of manufacturing STT-RAM. Cost models were presented to estimate the cost of a STT-RAM based on a three mask levels fabrication process. Although much effort has been put into reducing the switching current density, there are still no easy solutions to the problem. Research and development of STT-RAM must show success in a very near future or else STT-RAM will follow the step of its predecessor, MRAM: surviving in the niche market.
Description
Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, 2009.
This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.
Cataloged from student submitted PDF version of thesis.
Includes bibliographical references (p. 61-70).
Subjects
Materials Science and Engineering.
MIT Department
Massachusetts Institute of Technology. Department of Materials Science and Engineering
Terms of Use
M.I.T. theses are protected by
copyright. They may be viewed from this source for any purpose, but
reproduction or distribution in any format is prohibited without written
permission. See provided URL for inquiries about permission.
copyright. They may be viewed from this source for any purpose, but
reproduction or distribution in any format is prohibited without written
permission. See provided URL for inquiries about permission.
Persistent DSpace Link
