Micro Snap-Fits for Latching 3D MEMS Assemblies
Author(s)
Shaar, Nader Salah
Barbastathis, George
Livermore-Clifford, Carol
Date Issued
November 2010
Journal
Volume 10: Micro and Nano Systems
Publisher
ASME International
Citation
Shaar, N. S., et al. “Micro Snap-Fits for Latching 3D MEMS Assemblies.” Volume 10: Micro and Nano Systems, 12-18 November, 2010, Vancouver, British Columbia, Canada, ASME, 2010, pp. 209–12.
Version
Final published version
Abstract
This paper reports the design, fabrication and demonstration of micro-scale mechanical latches (micro snapfits) for assembling 3D micro-structures from 2D patterned precursors. The latches consist of pairs of pointy arrowheadlike features mounted on cantilevers, on one membrane, and corresponding slits in the mating membrane. As the membranes are pushed together, the cantilevers bend elastically and squeeze the arrowhead tips through the slits to latch onto the back side of the mating membrane. The latches are reversible, enabling reconfigurable assembly. They are also designed to have no backlash, enabling precise positioning of the assembled structures. An analytical model of the latches was used to design the profile of the arrowheads subject to the geometrical constraints imposed by the alignment system. The micro snapfits were demonstrated by assembling a corner-cube from two folded flat panels with the substrate serving as the third side. Copyright © 2010 by ASME.
MIT Department
Massachusetts Institute of Technology. Department of Mechanical Engineering
Terms of Use
Article is made available in accordance with the publisher's policy and may be subject to US copyright law. Please refer to the publisher's site for terms of use.
Persistent DSpace Link
DOI of Published Version
https://doi.org/10.1115/IMECE2010-38948
