Feasibility of Partial ZrO[subscript 2] Coatings on Outer Surface of Annular UO[subscript 2] Pellets to Control Gap Conductance
Name
NFC-080.pdf
Description
NFC-080.pdf
Size
1.06 MB
Format
Adobe PDF
Checksum (MD5)
341abaf7529726d37fa460d2cf563d00
Author(s)
Feinroth, H.
Yuan, Y.
Date Issued
June 2005
Publisher
Massachusetts Institute of Technology. Center for Advanced Nuclear Energy Systems. Nuclear Fuel Cycle Program
Series/Report no.
MIT-NFC;TR-080
Abstract
The viability of depositing a thin porous coating of zirconia on the outer surface of an annular UO[subscript 2] pellet
is investigated experimentally. Such a layer has been proposed to buffer the contact between the fuel and
cladding, thus maintaining an appropriate balance of heat transfer from the pellet to the outer and inner
cladding. MIT and Gamma Engineering commissioned laboratory studies of the feasibility of depositing a
controlled thickness of porous zirconia on an oxide surface. Experiments were conducted at the Thermal
Spray Laboratory at SUNY-Stonybrook to produce a thin layer of Yttria Stablized Zirconia (YSZ) on
alumina wafers. The experiments concluded that it is possible to use plasma spray guns to produce 50%
porous layers of 15–30 micrometer thickness. Measurements were conducted at the Vitreous State
Laboratory of the Catholic University of America to determine the thermal conductance of aluminazircaloy
and alumina-zircaloy-YSZ sandwiches as a function of applied pressure. A relation is developed
to predict the conductance at such surfaces.
Persistent DSpace Link
