Process optimization of plastic injection molding for minimal residual stress
Name
42799773-MIT.pdf
Description
Full printable version
Size
5.99 MB
Format
Adobe PDF
Checksum (MD5)
5166d257e3793d29b19abe67a7c3c1e0
Author(s)
Bazel, Teresa L. (Teresa Lorraine), 1965-
Advisor(s)
Roy Welsch and David Hardt.
Date Issued
1999
Publisher
Massachusetts Institute of Technology
Abstract
This thesis summarizes the progress made in developing a procedure to optimize a plastic injection molding process by minimizing the dimensional instability of a critical feature. It documents the steps taken by a development team at the Visteon facility in Belfast, Northern Ireland to apply Design of Experiments (DOE) in process research for the production of a plastic throttle body. The team demonstrated the feasibility of using designed experiments to understand the effects of five main process parameters; melt temperature, injection speed, hold pressure, mold temperature, and cooling time, on the deformation caused by thermal cycle exposure. The experiment results and analysis were successful in establishing a prediction model for the critical dimensions of the component before and after thermal exposure. The prediction model and additional testing indicated that adjustments to the process would reduce the dimensional shift of the bore radius by over fifty percent. The thesis stresses the use of a team approach and the application of analytical methods to better understand the process. The report also includes a brief discussion of the use of Computer Aided Engineering (CAE) techniques to improve the product development process.
Description
Thesis (S.M.)--Massachusetts Institute of Technology, Sloan School of Management; and, (S.M.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 1999.
Includes bibliographical references (p. 67-68).
Subjects
Sloan School of Management
Mechanical Engineering
MIT Department
Massachusetts Institute of Technology. Department of Mechanical Engineering
Sloan School of Management
Terms of Use
M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.
Persistent DSpace Link
