A numerical and analytical study of the effect of aspect ratio on the behavior of a round thermal
Name
10652_2014_9362_ReferencePDF.pdf
Size
1.21 MB
Format
Adobe PDF
Checksum (MD5)
c9397277a6d6f3a85d9e9c8e97127cde
Author(s)
Zhao, Bing
Lai, Adrian C. H.
Law, Adrian Wing-Keung
Adams, E. Eric
Date Issued
June 2014
Journal
Environmental Fluid Mechanics
Publisher
Springer Netherlands
Citation
Lai, Adrian C. H., Bing Zhao, Adrian Wing-Keung Law, and E. Eric Adams. “A Numerical and Analytical Study of the Effect of Aspect Ratio on the Behavior of a Round Thermal.” Environ Fluid Mech 15, no. 1 (June 12, 2014): 85–108.
Version
Author's final manuscript
Abstract
A round thermal is formed when an element of buoyant fluid is released instantaneously into a quiescent ambient. Although the thermal spreading rate is of primary importance to mathematical modeling, the reported values in the literature vary greatly. To identify possible factors affecting the thermal spreading rate, we investigated the effect of different initial conditions numerically by solving the unsteady Reynolds-averaged Navier–Stokes equations with a two-equation turbulence closure. The initial aspect ratio (i.e. length-to-diameter ratio) of the thermal was varied between 0.125–4.0, and the initial density differences was changed from 1 to 10 %. Results show that the spreading rate is greatly affected by the initial aspect ratio, which also explains the variations in earlier reported values. Following the numerical study, an analytical model using buoyant vortex ring theory is developed to predict the spreading rate of a thermal. The predictions show good agreement with the results from both the numerical simulations and previous experimental studies. Another simple analytical model is also presented to approximate the thermal induced flow, and is validated using the numerical simulations.
MIT Department
Massachusetts Institute of Technology. Center for Environmental Health Sciences
Massachusetts Institute of Technology. Department of Civil and Environmental Engineering
Terms of Use
Article is made available in accordance with the publisher's policy and may be subject to US copyright law. Please refer to the publisher's site for terms of use.
Persistent DSpace Link
DOI of Published Version
https://doi.org/10.1007/s10652-014-9362-3
