Wafer-Level Thermocompression Bonds
Name
AMMNS032.pdf
Size
603.52 KB
Format
Adobe PDF
Checksum (MD5)
76a587c6dcc0a34d9b0e97cf7400a923
Author(s) • •
Tsau, Christine H.
Schmidt, Martin A.
Spearing, S. Mark
Date Issued
January 2003
Series/Report no.
Advanced Materials for Micro- and Nano-Systems (AMMNS);
Abstract
Thermocompression bonding of gold is a promising technique for achieving low temperature, wafer-level bonding without the application of an electric field or complicated pre-bond cleaning procedure. The presence of a ductile layer influences the fracture behavior of the bonds. The fabrication process was described. In addition, the effect of plasticity was explored by varying the gold bonding thickness between 0.23 to 1.4 µm. Wafers were bonded at 300°C and two different pressures: 1.25 and 7 MPa. The bond toughness of the specimens were characterized using a four-point bend delamination technique. Cohesive failure was found to be the dominant fracture mode in the thicker films. Bonds made with thin gold films failed adhesively and at lower strain energy release rates.
Subjects
wafer bonding
thermocompression bonding
plasticity
Persistent DSpace Link