Race Car Reverse Gear Design
Name
English_aenglish_meche_sb_thesis_2025.pdf
Description
Thesis PDF
Size
7.34 MB
Format
Adobe PDF
Checksum (MD5)
66c0f7510ea22721ad1d65a1d1ac9ee5
Author(s)
English, Ashley E.
Advisor(s)
Winter, Amos
Date Issued
May 2025
Publisher
Massachusetts Institute of Technology
Abstract
This thesis presents the design, simulation, and installation of a reverse gear system for the RUSH SR, a lightweight, motorcycle-engine-powered race car that lacks built-in reverse capability. The proposed solution repurposes a high-torque automotive starter motor to drive the car in reverse through engagement with a custom ring gear on the rear differential. Analytical modeling and time-domain simulation were used to evaluate performance under varying loads, including the effect of incline angle on terminal velocity and motor current draw. Simulated results show that the system can reliably move the car in reverse on slopes up to 10° before stalling, with current draw remaining within safe operational limits. The mechanical design includes a new differential carrier, gear coupler, and ring gear, while the electrical system explores both off-the-shelf and custom high-side switching controllers to manage power and solenoid activation. The final hardware was bench tested and installed on a working vehicle. Recommendations for future validation include current-limited incline testing and dynamic vehicle response trials. This modular and cost-effective system demonstrates a practical solution to a common race car limitation while preserving the RUSH SR’s lightweight performance characteristics.
MIT Department
Massachusetts Institute of Technology. Department of Mechanical Engineering
Terms of Use
Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0)
Copyright retained by author(s)
Persistent DSpace Link
