BiDirectional optical communication with AquaOptical II
Name
Rus_Bidirectional optical.pdf
Size
1.14 MB
Format
Adobe PDF
Checksum (MD5)
64165d2835967e385b8275918bf88f66
Author(s)
Doniec, Marek Wojciech
Rus, Daniela L.
Date Issued
November 2010
Journal
IEEE International Conference on Communication Systems 2010 (ICCS)
Publisher
Institute of Electrical and Electronics Engineers (IEEE)
Citation
Doniec, Marek, and Daniela Rus. “BiDirectional Optical Communication with AquaOptical II.” IEEE International Conference on Communication Systems 2010 (ICCS). 390–394. © Copyright 2010 IEEE
Version
Final published version
Abstract
This paper describes AquaOptical II, a bidirectional, high data-rate, long-range, underwater optical communication system. The system uses the software radio principle. Each AquaOptical II modem can be programmed to transmit user defined waveforms and record the received waveforms for detailed analysis. This allows for the use of many different modulation schemes. We describe the hardware and software architecture we developed for these goals. We demonstrate bidirectional communication between two AquaOptical II modems in a pool experiment. During the experiment AquaOptical II achieved a signal to noise ration of 5.1 over a transmission distance of 50 m at pulse widths of 1 μsec, 500 ns, and 250 ns. When using discrete pulse interval modulation (DPIM) this corresponds to a bit-rate of 0.57 Mbit/s, 1.14 Mbit/s, and 2.28 Mbit/s.
MIT Department
Massachusetts Institute of Technology. Computer Science and Artificial Intelligence Laboratory
Massachusetts Institute of Technology. Department of Electrical Engineering and Computer Science
Massachusetts Institute of Technology. School of Engineering
Terms of Use
Article is made available in accordance with the publisher's policy and may be subject to US copyright law. Please refer to the publisher's site for terms of use.
Persistent DSpace Link
DOI of Published Version
https://doi.org/10.1109/ICCS.2010.5686513
