Repository logo
Log in(current)
Repository logoMIT Open ScholarshipDSpace@MIT
  1. Home
  2. MIT Open Access Articles
  3. MIT Open Access Articles
  4. The Effects of Calcium Aluminate Cement Substitution on Physicochemical Properties of Geopolymer–Zeolite Composites
This is not the latest version of this item. The latest version can be found here.

The Effects of Calcium Aluminate Cement Substitution on Physicochemical Properties of Geopolymer–Zeolite Composites

Thumbnail Image
Download
Name

13369_2021_6394_ReferencePDF.pdf

Size

896.83 KB

Format

Adobe PDF

Checksum (MD5)

e8c862207b225fca9190691ec0266580

Download all files submitted through automated deposit
art_1740618056342424138.zip (839.37 KB)
Author(s)
Kim, Hee-Jeong
•
Khalid, Hammad R.
Date Issued
January 10, 2022
Journal
Arabian Journal for Science and Engineering
Publisher
Springer Berlin Heidelberg
Citation
Kim, Hee-Jeong and Khalid, Hammad R. 2022. "The Effects of Calcium Aluminate Cement Substitution on Physicochemical Properties of Geopolymer–Zeolite Composites." Arabian Journal for Science and Engineering, 47.
Version
Author's final manuscript
Abstract
Abstract Zeolites are porous aluminosilicate materials and are commonly used as adsorbents for various pollutants. Geopolymers made from industrial waste materials have an aluminosilicate structure similar to zeolites and can be converted to crystalline zeolites under high temperature and pressure conditions (hydrothermal conditions). The present study investigated the effects of fly ash substitution by calcium aluminate cement (CAC) in hydrothermally-treated geopolymer binders (often referred to as geopolymer-zeolite composites or geopolymer-supported zeolites). The substitution levels of fly ash by CAC were varied from 0 to 50% (0, 10%, 20%, 40%, or 50%). A mixture of waterglass and NaOH solutions was used for alkali activation of raw materials. The test results revealed that the CAC significantly affected the strength development and reaction products. All the CAC-substituted specimens showed significantly higher strength than fly ash-based control specimens. It was noted that the rise in compressive strength was mainly due to the formation of C–A–S–H gel in CAC-substituted specimens. The control specimens showed Na–P1 type zeolite while chabazite, faujasite, and hydroxysodalite phases were identified with incorporation of CAC. Hence, it was found that the CAC addition resulted in different Ca/Si molar ratios, which promoted the formation of different types of zeolites, thus these specimens can potentially be used for specific target applications.
Terms of Use
Article is made available in accordance with the publisher's policy and may be subject to US copyright law. Please refer to the publisher's site for terms of use.
Persistent DSpace Link
https://hdl.handle.net/1721.1/141789
DOI of Published Version
https://doi.org/10.1007/s13369-021-06394-w
Repository logo
PrivacyPermissionsAccessibilityContact us
Repository logo
Notify us about copyright concerns.