Repository logo
Log in(current)
Repository logoMIT Open ScholarshipDSpace@MIT
  1. Home
  2. Earth Resources Laboratory
  3. ERL Industry Consortia Technical Reports
  4. Interval Attenuation Estimation

Interval Attenuation Estimation

Thumbnail Image
Download
Name

1998.12 Alshammery_Toksoz.pdf

Size

416.86 KB

Format

Adobe PDF

Checksum (MD5)

f4f5255981ef1a7d76e7b56b1e0d79a6

Author(s)
Alshammery, Hafiz J.
•
Toksoz, M. Nafi
Date Issued
1998
Publisher
Massachusetts Institute of Technology. Earth Resources Laboratory
Series/Report no.
Earth Resources Laboratory Industry Consortia Annual Report;1998-12
Abstract
The goal of this paper is to study the accuracy of estimating the Quality Factor (Q) from ultrasonic pre-stack P-wave reflection data. Q is estimated by applying the spectral ratio method to the top and bottom reflections of the target. The data used to estimate Q are shot gathers acquired over different target materials submerged in a water tank. Using this setup, Q is estimated for Lucite, rubber and Berea sandstone. The behavior of Q estimates with offset is also investigated. Theoretical error analysis shows that non-zero estimates are contaminated by the overburden (water) attenuation. It is predicted that this error is directly proportional to the ratio of target depth to its thickness, target Q value, overburden attenuation and the difference between the top and bottom reflection ray trajectories in the overburden. The estimation error for Lucite is around 20%. For the Sandstone the error is about 10%. The estimated rubber Q is between 17 and 20. The estimates of all the targets show increasing estimated Q with increasing offset. This behavior is correctly predicted in the error analysis and is due to the difference between the top and bottom reflection ray path lengths within the overburden and the target Q value.
Persistent DSpace Link
http://hdl.handle.net/1721.1/75389
Repository logo
PrivacyPermissionsAccessibilityContact us
Repository logo
Notify us about copyright concerns.