A preliminary architecture optimization for in-space assembled telescopes
Author(s)
Sanchez, William David
Albee, Keenan Eugene Sumner
Davidson, Rosemary Katherine
de Freitas Bart, Ryan
Cabrales Hernandez, Alejandro
Hoffman, Jeffrey A
Date Issued
October 2019
Journal
International Astronautical Congress
Citation
Sanchez, William David, et al., "A preliminary architecture optimization for in-space assembled telescopes." 70th International Astronautical Congress (IAC), October 21-25, 2019, Washington, D.C. url https://iafastro.directory/iac/paper/id/52358/summary/ ©2019 Authors
Version
Author's final manuscript
Abstract
The current trend towards larger diameter space-based and ground-based telescopes reflects both improvements in manufacturing technology and the need for more light-gathering capability. Although ground telescopes can continue to grow in diameter using previous manufacturing and assembly techniques, spacebased telescope mirror diameters are limited by the fairing size of a single launch vehicle. Looking towards the future, the demand for larger diameter primary mirrors is expected to quickly outgrow the size of a single launch vehicle fairing. In this case, the only viable option for a larger diameter space telescope will be on-orbit assembly. This paper provides a preliminary framework to optimize the architectural trade-space of in-space assembled telescopes as well as a metric to quantify the relative cost of the designs. Key parameters driving the architecture of such a system were identified and enumerated. These include primary mirror segment size, raft (i.e., unit of segments ready for assembly) geometry and configuration, in-space assembly location, and launch vehicle selection. The results of the paper are presented through a Pareto Analysis which ultimately describes the optimal architecture against the trade-space considered. This includes design of fuel-efficient trajectories generated from the Circular Restricted Three-Body problem for transfer of components to the assembly and mission locations (e.g., Earth-Moon L1, Sun-Earth L2). Furthermore, an optimization scheme is demonstrated for launch vehicle packing/manifesting with constraints on component selection, payload limitations for reaching the desired assembly point, and scheduling of launch vehicle and components. ©2019 Paper presented at the 70th International Astronautical Congress (IAC), October 21-25, 2019, Washington D.C. keywords: in-space; telescopes; assembly; packing; optimization
MIT Department
Massachusetts Institute of Technology. Department of Aeronautics and Astronautics
Terms of Use
Creative Commons Attribution-Noncommercial-Share Alike
Persistent DSpace Link
DOI of Published Version
https://iafastro.directory/iac/paper/id/52358/summary/
