Investigation of the use of nanofluids to enhance the In-Vessel Retention capabilities of Advanced Light Water Reactors
Name
214328868-MIT.pdf
Description
Full printable version
Size
7.23 MB
Format
Adobe PDF
Checksum (MD5)
13cfa2e2ffc51e82b3fe49edd389866f
Author(s)
Hannink, Ryan Christopher
Advisor(s)
Jacopo Buongiorno and Lin-Wen Hu.
Date Issued
2007
Publisher
Massachusetts Institute of Technology
Abstract
Nanofluids at very low concentrations experimentally exhibit a substantial increase in Critical Heat Flux (CHF) compared to water. The use of a nanofluid in the In-Vessel Retention (IVR) severe accident management strategy, employed in Advanced Light Water Reactors, was investigated. A model simulating the two-phase flow and heat transfer on the reactor vessel outer surface quantified the increase in decay power that can be removed using a nanofluid, predicting that the use of a nanofluid will allow a stable operating power ~40% greater than the power allowable using water to be achieved, while holding the Minimum Departure from Nucleate Boiling Ratio (MDNBR) constant. A nanofluid injection system that would take advantage of the enhanced CHF properties of the nanofluid in order to provide a higher safety margin than the current IVR strategy or, for given margin, enable IVR at higher core power, is proposed. A risk-informed analysis has revealed that this injection system has a reasonably high success probability of 0.99, comparable to the success probability without the injection system. Potential regulatory, environmental, and health risk issues were analyzed, and it was concluded that the current regulatory regimes are adequate for ensuring that the implementation of nanofluids in IVR will not endanger public health and safety. However, experimental verification of nanofluid CHF enhancement at prototypical IVR conditions and periodic nanofluid property testing as a surveillance requirement are needed to reduce the key uncertainties related to nanofluid performance. Finally, a periodic review of the health and environmental risks of nanofluids and, if necessary,follow-up research are ecommended to ensure the health of the public and environment.
Description
Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Nuclear Science and Engineering; and, (S.M.)--Massachusetts Institute of Technology, Engineering Systems Division, Technology and Policy Program, 2007.
Includes bibliographical references (p. 126-130).
Subjects
Nuclear Science and Engineering.
Technology and Policy Program.
MIT Department
Massachusetts Institute of Technology. Department of Nuclear Science and Engineering
Massachusetts Institute of Technology. Engineering Systems Division
Technology and Policy Program
Terms of Use
M.I.T. theses are protected by
copyright. They may be viewed from this source for any purpose, but
reproduction or distribution in any format is prohibited without written
permission. See provided URL for inquiries about permission.
copyright. They may be viewed from this source for any purpose, but
reproduction or distribution in any format is prohibited without written
permission. See provided URL for inquiries about permission.
Persistent DSpace Link
