The third Sandia Fracture Challenge: deterministic and probabilistic modeling of ductile fracture of additively-manufactured material
Name
10704_2019_355_ReferencePDF.pdf
Size
12.09 MB
Format
Unknown
Checksum (MD5)
de13c8db020d9c4371cfb7e261e3bc3a
Author(s)
Tancogne-Dejean, Thomas
Gorji Bandpay, Maysam
Pack, Keun Hwan
Roth, Christian C.
Date Issued
March 27, 2019
Publisher
Springer Netherlands
Version
Author's final manuscript
Abstract
Abstract
Within the scope of the third Sandia Fracture Challenge the plasticity and ductile fracture behavior of an additively manufactured 316L stainless steel tensile specimen containing through holes and internal cavities is predicted in a blind round robin format. Only a limited number of experimental results, including flat dogbone-shaped and double-notch tension specimens, as well as EBSD maps of the Challenge geometry are provided by Sandia National Laboratory. A non-associated Hill’48 plasticity model with Swift-Voce strain hardening and Johnson–Cook strain rate hardening is used to accurately describe the large deformation response of the material. A special case of the recently developed Hosford–Coulomb model is used to predict fracture initiation and propagation by crack re-initiation. Very good qualitative and quantitative agreement of the blind prediction with the experimental results is obtained for both global force-displacement responses as well as the local surface strain evolution throughout the test. In a post challenge follow-up study, the role of the plasticity model is evaluated, focusing on the effect of the anisotropy and the strain-rate on the material response. Aside from considering the deterministic model, the statistical material properties of the additively manufactured structure are analyzed by defining a heterogeneous random media model. Probabilistic material properties for both plasticity and fracture are assigned to each element of the Challenge specimen. As an alternative, the role of intrinsic porosities is analyzed by randomly deleting 1% of the pristine geometry. The results of both approaches show that the presence of homogeneities follows a more realistic description of the material behavior, especially in the crack propagation regime post maximum force and when looking at local strains.
MIT Department
Massachusetts Institute of Technology. Department of Mechanical Engineering
Massachusetts Institute of Technology. Impact and Crashworthiness Laboratory
Terms of Use
Article is made available in accordance with the publisher's policy and may be subject to US copyright law. Please refer to the publisher's site for terms of use.
Persistent DSpace Link
DOI of Published Version
https://doi.org/10.1007/s10704-019-00355-z
