Vapor-liquid-solid (VLS) growth of lead chalcogenide thin films for infrared sensing applications
Name
1057894271-MIT.pdf
Description
Full printable version
Size
4.76 MB
Format
Adobe PDF
Checksum (MD5)
89a2ba35ca104d0f70a1b7d75e5c727b
Author(s)
Sourakov, Alexandra Andreevna
Advisor(s)
Rafael Jaramillo.
Date Issued
2018
Publisher
Massachusetts Institute of Technology
Abstract
Infrared sensors are used in a variety of applications, from gas and moisture analysers, to human body detection to spectrophotometers. Available IR technology falls on two ends of the spectrum: state-of-art photon detectors are high-quality but expensive and cumbersome due to the need for cryogenic cooling, while thermal detectors are inexpensive but not very sensitive. The goal of this project is to develop materials for uncooled IR sensors with improved performance. Lead selenide (PbSe) detectors are direct narrow band gap materials that have shown promise for relatively inexpensive IR sensing with modest cooling requirements. Adapting the vapour-liquid-solid (VLS) growth mechanism traditionally used for growing nanowires to growing PbSe thin films circumvents the very slow adsorption of a gas phase into a solid surface by introducing a catalytic liquid alloy phase, while simultaneously retaining the stoichiometric control, simplicity, and economy of vapor phase growth. We have set the stage for further experimentation by demonstrating that we can attain a single phase PbSe thin film via VLS growth on an epitaxially matched substrate. We have explored the effects of VLS growth vs. vapor growth on crystal quality as well as the factors that influence diffusion and nucleation rates, such as film thickness, growth temperature, and the presence of a capping layer.
Description
Thesis: S.B., Massachusetts Institute of Technology, Department of Materials Science and Engineering, 2018.
Cataloged from PDF version of thesis.
Includes bibliographical references (pages 41-42).
Subjects
Materials Science and Engineering.
MIT Department
Massachusetts Institute of Technology. Department of Materials Science and Engineering
Terms of Use
MIT theses are protected by copyright. They may be viewed, downloaded, or printed from this source but further reproduction or distribution in any format is prohibited without written permission.
Persistent DSpace Link
