Realizing a design for a cloud chamber cooled by thermoelectric modules
Name
1080339575-MIT.pdf
Description
Full printable version
Size
2.91 MB
Format
Adobe PDF
Checksum (MD5)
8578508a3779852887dd1c0465371eaf
Author(s)
Larson, Michael (Michael K.), S.B. Massachusetts Institute of Technology
Advisor(s)
Ian Hunter.
Date Issued
2018
Publisher
Massachusetts Institute of Technology
Abstract
A cloud chamber consists of a super-saturated vapor inside a sealed chamber which forms visible trails of mist when radiation particles are emitted from a nearby source. Such behavior can be used to supplement the teaching of entry-level physics students, as the cloud chamber provides a visual demonstration for phenomena which otherwise might remain somewhat abstract, such as Lorentz Force Law. However, most cloud chambers require the use of material such as dry ice to induce surface temperatures below -26° C. Cooling a surface below this threshold enables the formation of super-saturated vapors of fluids such as isopropyl alcohol, which is used in this experiment. In order to address the problems with space, storage, and flexibility that typically exist with cloud chambers, this thesis explores the use of thermoelectric coolers (TECs) instead of dry ice to create the temperature difference needed to visualize radiation particles. The TECs, which are cooled by a Liqmax II 120S liquid CPU cooler, interface with a copper plate on which isopropyl alcohol forms a super-saturated vapor. A 3D printed plate houses the TECs and copper plate, and supports an acrylic covering which seals the chamber. Using a multi-stage TEC module, the copper plate reaches a temperature of -40° C within two minutes of being powered. The visibility of radiation in the super-saturated region was observed using three materials: Polonium-210, Lead-2 10, and Strontium-90. The cloud chamber can be improved and further work is discussed.
Description
Thesis: S.B., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2018.
Cataloged from PDF version of thesis.
Includes bibliographical references.
Subjects
Mechanical Engineering.
MIT Department
Massachusetts Institute of Technology. Department of Mechanical Engineering
Terms of Use
MIT theses are protected by copyright. They may be viewed, downloaded, or printed from this source but further reproduction or distribution in any format is prohibited without written permission.
Persistent DSpace Link
