Repository logo
Log in(current)
Repository logoMIT Open ScholarshipDSpace@MIT
  1. Home
  2. Department of Mechanical Engineering
  3. Heat Transfer Laboratory
  4. Heat Transfer Laboratory Technical Reports
  5. Thermal contact resistance in a non-ideal joint

Thermal contact resistance in a non-ideal joint

Thumbnail Image
Download
Name

HTL_TR_1971_077.pdf

Size

10.42 MB

Format

Adobe PDF

Checksum (MD5)

928788b8b2d7baf9beeefeb718f55c4c

Author(s)
Roca, Richard T.
•
Mikic, B. B.
Date Issued
1971
Publisher
Cambridge, Mass. : M.I.T. Dept. of Mechanical Engineering, [1971]
Series/Report no.
Technical report (Massachusetts Institute of Technology, Heat Transfer Laboratory) ; no. 77.
Abstract
The contact conductance at an interface can be determined by knowing the material and surface properties and the interfacial pressure distribution. This pressure distribution can be influenced strongly by the roughness of the mating surfaces but until now this effect has been ignored in studies of joint conductance. This thesis considers this effect and shows the circumstances when it is an important factor. Furthermore, it is shown that one can either raise or lower the total resistance of a joint by changing the surface properties in the proper manner for the particular system being considered. Specifically, this thesis deals with three systems: the contact of two rough, wavy surfaces; the contact of two rough but nominally flat plates pressed together over a concentrated area; and the contact of two rough but nominally flat plates bolted together. In each case the pressure distribution is calculated as a function of the surface properties. In the case of wavy surfaces it is found that all necessary information for any combination of parameters can be reduced to one master graph. In the other two cases one such graph is needed for each geometry used. The resulting pressure distributions are used in a specific heat transfer example and the total joint resistance versus roughness is presented. It is shown how one can actually decrease the resistance by increasing the roughness - a seemingly contradictory phenomenon. Heat transfer experiments performed by Joseph Pigott qualitatively confirmed the theoretical findings.
Subjects
Joints (Engineering)
Heat -- Conduction.
Surfaces (Technology)
Thermal stresses.
Persistent DSpace Link
http://hdl.handle.net/1721.1/61442
Repository logo
PrivacyPermissionsAccessibilityContact us
Repository logo
Notify us about copyright concerns.