Numerical Investigation of turbulent coupling boundary layer of air-water interaction flow
Name
66914549-MIT.pdf
Description
Full printable version
Size
18.13 MB
Format
Adobe PDF
Checksum (MD5)
75085f59a938cfc498a985d4af7b3423
Author(s)
Liu, Song, S.M. Massachusetts Institute of Technology
Advisor(s)
Dick K.P. Yue.
Date Issued
2005
Publisher
Massachusetts Institute of Technology
Abstract
Air-water interaction flow between two parallel flat plates, known as Couette flow, is simulated by direct numerical simulation. The two flowing fluids are coupled through continuity of velocity and shear stress condition across the interface. Pseudo-spectral method is used in each flow subdomain with Fourier expansion in streamwise and spanwise directions and finite difference in vertical direction. Statistically quasi-steady flow properties, such as mean velocity profiles, turbulent intensities, Reynolds stress and turbulent kinetic energy (TKE) budget terms show significant differences between air-water interface turbulence near the water side (IntT-w) and wall-bounded turbulence(WT) while there are some similarities between IntT-w and free surface turbulence (FST). Due to the velocity fluctuation at the interface, water side near interface turbulence flow (IntT-w) is characterized with a thinner viscous sub-layer and decreased intercept parameter B in log-law layer, strengthened Reynolds stress and eddy viscosity, together with a stronger production term, decreasing-then-increasing dissipation term and negative turbulent diffusion term in TKE budget.
(cont.) Abundant physical phenomena exist on the water side turbulent flow with four major types of three-dimensional vortex structures identified near the interface by variable-interval spacing averaging (VISA) techniques. Each type of vortex structures is found to play an essential role in the turbulent energy balance and passive scalar transport.
Description
Thesis (S.M. in Mechanical Engineering and S.M. in Ocean Engineering)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2005.
Includes bibliographical references (p. 159-164).
Subjects
Mechanical Engineering.
Center for Ocean Engineering.
MIT Department
Massachusetts Institute of Technology. Center for Ocean Engineering
Massachusetts Institute of Technology. Department of Mechanical Engineering
Terms of Use
M.I.T. theses are protected by
copyright. They may be viewed from this source for any purpose, but
reproduction or distribution in any format is prohibited without written
permission. See provided URL for inquiries about permission.
copyright. They may be viewed from this source for any purpose, but
reproduction or distribution in any format is prohibited without written
permission. See provided URL for inquiries about permission.
Persistent DSpace Link
