Encapsulating commercial accelerometers with epoxy and fluoroelastomer for harsh hydrocarbon fluid environment
Name
s41598-023-46781-x.pdf
Description
Published version
Size
4.26 MB
Format
Adobe PDF
Checksum (MD5)
c69a321624ae8852a46f7901bf8da3d1
Author(s)
Wankhede, Sahil P
Du, Xian
Brashler, Keith W
Ba’adani, Mohammad M
Turcan, Doru C
Shehri, Ali H
Youcef-Toumi, Kamal
Date Issued
2023
Journal
Scientific Reports
Publisher
Springer Science and Business Media LLC
Citation
Wankhede, Sahil P, Du, Xian, Brashler, Keith W, Ba’adani, Mohammad M, Turcan, Doru C et al. 2023. "Encapsulating commercial accelerometers with epoxy and fluoroelastomer for harsh hydrocarbon fluid environment." Scientific Reports, 13 (1).
Version
Final published version
Abstract
AbstractTraditionally, in the oil and gas industry, accelerometers are mounted externally on motors for condition monitoring of vertically suspended, closed suction hydrocarbon pumps due to their inability to withstand harsh downhole environments, preventing the detection of impeller failures. This study addresses the need for encapsulation solutions for accelerometers submerged in hydrocarbon fluid environments. It evaluates the feasibility of epoxy and fluoroelastomer as encapsulation materials for long-term immersion in high-temperature hydrocarbon fluid and determines their impact on the accelerometer's performance. Extensive testing involved submersion in high-temperature hydrocarbon fluid at 150 °C for over 10,000 h and six months in brine. Material characterization, including mass variation, microscopic imaging, and FTIR spectroscopy, revealed negligible degradation. Encapsulated accelerometers effectively detected vibrations with an acceptable alteration in amplitude. In comparison with commercial alternatives, our encapsulation outperformed them. While oil traces became evident within just 24 h in the alternatives, our solution exhibited no signs of leakage. This research pioneers a novel packaging solution employing epoxy and fluoroelastomer for side-exit commercial sensors tailored for high-temperature hydrocarbon fluid applications, addressing a critical gap in the industry. Our work enhances reliability and safety for vertical oil pump condition monitoring in downhole applications, benefiting the oil and gas sector.
MIT Department
Massachusetts Institute of Technology. Department of Mechanical Engineering
Terms of Use
Creative Commons Attribution
Persistent DSpace Link
DOI of Published Version
https://doi.org/10.1038/s41598-023-46781-x
