Repository logo
Log in(current)
Repository logoMIT Open ScholarshipDSpace@MIT
  1. Home
  2. MIT Open Access Articles
  3. MIT Open Access Articles
  4. The Phase-2 Upgrade of the CMS Data Acquisition

The Phase-2 Upgrade of the CMS Data Acquisition

Thumbnail Image
Download
Name

epjconf_chep2021_04023.pdf

Description
Published version
Size

1.81 MB

Format

Adobe PDF

Checksum (MD5)

1a0f5d512fc4e0d72b49dd3349b0aa92

sword-2022-04-27T15:06:43.original.xml (130 B)
Original SWORD entry document
Author(s)
Paus, Christoph
Date Issued
2021
Journal
EPJ Web of Conferences
Publisher
EDP Sciences
Citation
Paus, Christoph. 2021. "The Phase-2 Upgrade of the CMS Data Acquisition." EPJ Web of Conferences, 251.
Version
Final published version
Abstract
The High Luminosity LHC (HL-LHC) will start operating in 2027 after the third Long Shutdown (LS3), and is designed to provide an ultimate instantaneous luminosity of 7:5 × 1034 cm−2 s−1, at the price of extreme pileup of up to 200 interactions per crossing. The number of overlapping interactions in HL-LHC collisions, their density, and the resulting intense radiation environment, warrant an almost complete upgrade of the CMS detector. The upgraded CMS detector will be read out by approximately fifty thousand highspeed front-end optical links at an unprecedented data rate of up to 80 Tb/s, for an average expected total event size of approximately 8 − 10 MB. Following the present established design, the CMS trigger and data acquisition system will continue to feature two trigger levels, with only one synchronous hardware-based Level-1 Trigger (L1), consisting of custom electronic boards and operating on dedicated data streams, and a second level, the High Level Trigger (HLT), using software algorithms running asynchronously on standard processors and making use of the full detector data to select events for offline storage and analysis. The upgraded CMS data acquisition system will collect data fragments for Level-1 accepted events from the detector back-end modules at a rate up to 750 kHz, aggregate fragments corresponding to individual Level- 1 accepts into events, and distribute them to the HLT processors where they will be filtered further. Events accepted by the HLT will be stored permanently at a rate of up to 7.5 kHz. This paper describes the baseline design of the DAQ and HLT systems for the Phase-2 of CMS.
MIT Department
Massachusetts Institute of Technology. Department of Physics
Terms of Use
Creative Commons Attribution 4.0 International license
https://creativecommons.org/licenses/by/4.0/
Persistent DSpace Link
https://hdl.handle.net/1721.1/142126
DOI of Published Version
https://doi.org/10.1051/EPJCONF/202125104023
Repository logo
PrivacyPermissionsAccessibilityContact us
Repository logo
Notify us about copyright concerns.