A low order model for vertical axis wind turbines
Name
Peraire_A low.pdf
Size
807.85 KB
Format
Adobe PDF
Checksum (MD5)
590f0e1059c6294c728eb3d827d63797
Author(s) • •
Asher, Isaac M.
Drela, Mark
Peraire, Jaime
Date Issued
June 2010
Journal
28th AIAA Applied Aerodynamics Conference
Publisher
American Institute of Aeronautics and Astronautics
Citation
Asher, Isaac M., Mark Drela and Jaime Peraire. "A Low Order Model for Vertical Axis Wind Turbines." in Proceedings of the 28th AIAA Applied Aerodynamics Conference 28 June-1 July 2010, Chicago, Illinois.
Version
Author's final manuscript
Abstract
A new computational model for initial sizing and performance prediction of vertical axis wind turbines
is presented. The model uses a 2D hybrid dynamic vortex and blade element momentum approach. Each
airfoil is modeled as a single vortex of time varying strength with an analytical model for the influence of the
shed vorticity. The vortex strengths are calculated by imposing a flow tangency condition at the three-quarter
chord location on each airfoil, modified in the case of stall. The total blade forces and the momentum-based
streamtube deceleration are then obtained using pre-computed c[subscript d] and c[subscript m] 2D blade profile characteristics.
Model fidelity is improved over previous models because flow curvature, dynamic vortices, blade interactions,
static stall, and streamtube changes are all taken into account. Fast convergence is obtained for a large range
of solidity and tip speed ratio, which allows optimization of various parameters, including blade pitch angle
variation.
MIT Department
Massachusetts Institute of Technology. Department of Aeronautics and Astronautics
Terms of Use
Attribution-Noncommercial-Share Alike 3.0 Unported
Persistent DSpace Link