Chemical Heterogeneities on La[subscript 0.6]Sr[subscript 0.4]CoO[subscript 3−δ] Thin Films--Correlations to Cathode Surface Activity and Stability
Name
Chem Mat_submit_01292012- yildiz.pdf
Size
1.67 MB
Format
Adobe PDF
Checksum (MD5)
3901558872bf952ac3363c0429a2ea93
Author(s)
Cai, Zhuhua
Kubicek, Markus
Yildiz, Bilge
Fleig, Jurgen
Date Issued
February 2012
Journal
Chemistry of Materials
Publisher
American Chemical Society (ACS)
Citation
Cai, Zhuhua, Markus Kubicek, Jürgen Fleig, and Bilge Yildiz. “ Chemical Heterogeneities on La 0.6 Sr 0.4 CoO 3−δ Thin Films—Correlations to Cathode Surface Activity and Stability .” Chemistry of Materials 24, no. 6 (March 27, 2012): 1116–1127.
Version
Author's final manuscript
Abstract
La[subscript 0.6]Sr[subscript 0.4]CoO[subscript 3−δ](LSC) thin film cathodes synthesized by pulsed laser deposition at 450°C (LSC_450°C) and 650°C (LSC_650°C) exhibit different electrochemical performance. The origin of the differences in the oxygen reduction activity and stability of these cathodes is investigated on the basis of their surface chemistry and their surface atomic and electronic structures. Angle resolved X-ray photoelectron spectroscopy and nanoprobe Auger electron spectroscopy are used to identify the surface cation content, chemical bonding environment, and the spatial heterogeneities with nanoscale resolution. The higher electrochemical activity of LSC_450°C is attributed to the more stoichiometric cation content on the surface and the more uniform lateral and depth distribution of constituent cations. The poorly crystalline atomic structure of the LSC_450°C was found to prohibit the extensive segregation and phase separation on the surface because of the more favorable elastic and electrostatic interactions of Sr in the bulk. Upon annealing in air at 600 °C, the surface of the LSC_650°C undergoes a structural change from a Sr-rich LSC state to a SrO/Sr(OH)[subscript 2]-rich phase-separated state. The partial blockage of the surface with the heterogeneously distributed SrO/Sr(OH)[subscript 2]-rich phases, the decrease in oxygen vacancy content, and the deterioration of the electron transfer properties as evidenced from the Co oxidation state near the surface are found responsible for the severe electrochemical deactivation of the LSC_650°C. These results are important for advancing our ability to tailor the electrochemical performance of solid oxide fuel cell cathodes by understanding the relation of surface chemistry and structure to the oxygen reduction activity and stability, and the dependence of cation segregation on its driving forces including material microstructure.
MIT Department
Massachusetts Institute of Technology. Department of Nuclear Science and Engineering
Massachusetts Institute of Technology. Laboratory for Electrochemical Interfaces
Terms of Use
Article is made available in accordance with the publisher's policy and may be subject to US copyright law. Please refer to the publisher's site for terms of use.
Persistent DSpace Link
DOI of Published Version
https://doi.org/10.1021/cm203501u
