Towards and embeddable structural health monitoring sensor : design and optimization of MEMS piezoelectric vibration energy harvesters
Name
74277671-MIT.pdf
Description
Full printable version
Size
18.48 MB
Format
Adobe PDF
Checksum (MD5)
98779515da7fdef7a224ee835f937d79
Author(s)
Mracek, Anna Marie
Advisor(s)
Brian L. Wardle.
Alternative Title
Towards an embeddable composite health monitoring sensor : design and optimization of MEMS piezoelectric vibration energy harvesters
Date Issued
2006
Publisher
Massachusetts Institute of Technology
Abstract
Wireless structural health monitoring (SHM) has gained considerable interest as a potential method of reducing aircraft maintenance costs while increasing safety. Distributed power supplies for the sensing nodes are needed for a practical implementation of this technique. Vibrational energy harvesting using MEMS piezoelectric resonant devices is an appealing solution to this challenge due to their relatively high potential for power generation (compared to other harvesting techniques) and capacity to be integrated into the microfabrication procedure of the remainder of the SHM node. A comprehensive review of energy harvesting devices, particularly piezoelectric harvesters, is presented, including characterization of previous devices in terms of key power performance metrics. An existing coupled electromechanical model is presented and modified for use in optimization studies with both {3-1} Mode and {3-3} Mode piezoelectric cantilevered beam configurations. The modified model accurately represents published experimental results. A series of design optimization studies is presented for four devices operating in an aircraft vibration environment.
(cont.) Untapered bimorph {3-1} Mode and unimorph {3-3} Mode MEMS devices with large proof masses, as well as tapered unimorph devices (both with and without proof masses) are studied and a 2- or 3-parameter geometric optimization is performed. Optimization objectives include power output, operating power density, static power density, and specific power with very different optimum device configurations favored for the different objectives. A {3-3} Mode MEMS unimorph device optimized for static power density is conservatively predicted to generate 1.9 mW/cm3 of electrical power. This optimization is presented graphically and the predicted performance of the optimum {3-3} Mode unimorph devices with proof masses is detailed. It is found that the optima occur within the micro-scale design space studied, suggesting that MEMS devices are the best choice for distributed aircraft vibrational energy harvesting. The optimization results presented are for one potential SHM vibration environment using cantilevered beam harvesters, however, the technique presented can be extended to other environments and other harvester geometries.
Description
Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Aeronautics and Astronautics, 2006.
Includes bibliographical references (p. 123-127).
Subjects
Aeronautics and Astronautics.
MIT Department
Massachusetts Institute of Technology. Department of Aeronautics and Astronautics
Terms of Use
M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.
Persistent DSpace Link
