Interfacial Temperature and Density Discontinuities for Phase-Change Heat Transfer With Noncondensable Gas
Name
ht-25-1001.pdf
Description
Published version
Size
1.44 MB
Format
Adobe PDF
Checksum (MD5)
f29df5e3190678a0b2c1973750fd36d3
Author(s)
Chen, Gang
Date Issued
August 4, 2025
Journal
ASME Journal of Heat and Mass Transfer
Publisher
ASME International
Citation
Chen, G. (August 4, 2025). "Interfacial Temperature and Density Discontinuities for Phase-Change Heat Transfer With Noncondensable Gas." ASME. J. Heat Mass Transfer. November 2025; 147(11): 111601.
Version
Final published version
Abstract
In recent prior work, the author derived interfacial mass and heat flux conditions for phase-change processes. The mass flux condition is identical to the Schrage equation, but the additional heat flux expression enables one to couple the interface to the continua in both the liquid and the vapor phases and compute the interfacial temperature and density discontinuities. However, questions exist on how to treat phase change heat transfer in the presence of noncondensable gases. In this work, the author shows that the same set of interfacial conditions can be used to account for the presence of noncondensable gases. Although the mass flux of noncondensable gas is zero, their presence impacts the heat transfer. For evaporation, when the presence of the noncondensable gas is small, temperature and density discontinuities persist across the interface, as well as inverted temperature distributions. For condensation, however, no temperature inversion happens in the presence of a small amount of noncondensable gas and the interfacial temperature jump is significantly smaller. When a large amount of noncondensable gas is present, such as for evaporation into and condensation from air, the temperature discontinuities at the interface are significantly smaller and no temperature inversion happens. For evaporation driven purely by humidity difference, temperature inversion and discontinuity still exist. Results from this work will benefit the modeling of phase change processes in the presence of noncondensable gases, evaporative cooling in air, air-gap distillation, atmospheric water harvesting, and other applications.
Terms of Use
Article is made available in accordance with the publisher's policy and may be subject to US copyright law. Please refer to the publisher's site for terms of use.
Persistent DSpace Link
DOI of Published Version
https://doi.org/10.1115/1.4068720
