Economic Analysis of 3D-Printed Ceramic Cores for GasTurbine Investment Castings
Name
maristany-eduardom-mba-mgt-2023-thesis.pdf
Description
Thesis PDF
Size
577.6 KB
Format
Adobe PDF
Checksum (MD5)
8dac9927da2ecd751cea50534356ad9b
Author(s)
Maristany, Eduardo
Advisor(s)
Cordero, Zachary
Carrier, John
Date Issued
June 2023
Publisher
Massachusetts Institute of Technology
Abstract
When manufacturing blades and vanes for gas turbine engines, internal cooling channels are formed by investment casting with sacrificial ceramic cores. The hot injection and pressing techniques traditionally used to manufacture ceramic cores have long lead times and high up-front costs, motivating an interest to form cores via additive manufacturing. While industrial additive manufacturing technologies enable a faster and more iterative ceramic core manufacturing process, this efficiency comes with high per unit manufacturing costs of additive methods. To determine the quantities for which additive manufacturing is more economical than traditional hot injection and pressing methods, an economic analysis of the aircraft engine and investment casting markets is conducted. Current technical capabilities of several additive methods for forming ceramic cores are compared and Stereolithography and Digital Light Processing are found to be suitable for ceramic core manufacturing. The economic advantage of using viable additive manufacturing methods is assessed using publicly available financial, maintenance, and aircraft fleet size data in a manufacturing cost model. When considering user experience curve effects, the model shows that for a single core design, additive manufacturing is economical at quantities below 1,900 cores, or about 16 high pressure turbine stage sets. When considering multiple core designs needed to satisfy demand across all commercial aircraft in use, the model shows that additive manufacturing is economical at quantities below 720,000 cores, or 14% of the total core market demand in 2019. This motivates the use of additive manufacturing for new core design development and testing as well as the maintenance of older engine designs while reaffirming the use hot injection and pressing techniques for production level manufacturing and maintenance.
MIT Department
Massachusetts Institute of Technology. Department of Aeronautics and Astronautics
Sloan School of Management
Terms of Use
In Copyright - Educational Use Permitted
Copyright retained by author(s)
Persistent DSpace Link
