This is not the latest version of this item. The latest version can be found here.
Lath Martensite Microstructure Modeling: A High-Resolution Crystal Plasticity Simulation Study
Name
materials-14-00691-v3.pdf
Size
60.42 MB
Format
Adobe PDF
Checksum (MD5)
9ad673063ece098647758d5b2b1bd42a
Author(s)
Gallardo-Basile, Francisco-José
Naunheim, Yannick
Roters, Franz
Diehl, Martin
Date Issued
February 2, 2021
Publisher
Multidisciplinary Digital Publishing Institute
Citation
Materials 14 (3): 691 (2021)
Version
Final published version
Abstract
Lath martensite is a complex hierarchical compound structure that forms during rapid cooling of carbon steels from the austenitic phase. At the smallest, i.e., ‘single crystal’ scale, individual, elongated domains, form the elemental microstructural building blocks: the name-giving laths. Several laths of nearly identical crystallographic orientation are grouped together to blocks, in which–depending on the exact material characteristics–clearly distinguishable subblocks might be observed. Several blocks with the same habit plane together form a packet of which typically three to four together finally make up the former parent austenitic grain. Here, a fully parametrized approach is presented which converts an austenitic polycrystal representation into martensitic microstructures incorporating all these details. Two-dimensional (2D) and three-dimensional (3D) Representative Volume Elements (RVEs) are generated based on prior austenite microstructure reconstructed from a 2D experimental martensitic microstructure. The RVEs are used for high-resolution crystal plasticity simulations with a fast spectral method-based solver and a phenomenological constitutive description. The comparison of the results obtained from the 2D experimental microstructure and the 2D RVEs reveals a high quantitative agreement. The stress and strain distributions and their characteristics change significantly if 3D microstructures are used. Further simulations are conducted to systematically investigate the influence of microstructural parameters, such as lath aspect ratio, lath volume, subblock thickness, orientation scatter, and prior austenitic grain shape on the global and local mechanical behavior. These microstructural features happen to change the local mechanical behavior, whereas the average stress–strain response is not significantly altered. Correlations between the microstructure and the plastic behavior are established.
Terms of Use
Creative Commons Attribution
Persistent DSpace Link
DOI of Published Version
http://dx.doi.org/10.3390/ma14030691
