The engine reformer: Syngas production in an engine for compact gas-to-liquids synthesis
Name
Engine_Reformer_Manuscript_v6.pdf
Size
3.4 MB
Format
Adobe PDF
Checksum (MD5)
194fd45e145f822c4be9737e51dc77b0
Author(s)
Lim, Emmanuel Gocheco
Dames, Enoch E.
Cedrone, Kevin David
Acocella, Angela Josephine
Needham, Thomas R.
Cohn, Daniel R
Bromberg, Leslie
Cheng, Wai K
Green, William H
Arce, Andrea, S.B. Massachusetts Institute of Technology
Date Issued
March 2016
Journal
The Canadian Journal of Chemical Engineering
Publisher
Wiley Blackwell
Citation
Lim, Emmanuel G. et al. “The Engine Reformer: Syngas Production in an Engine for Compact Gas-to-Liquids Synthesis.” The Canadian Journal of Chemical Engineering 94.4 (2016): 623–635.
Version
Author's final manuscript
Abstract
Methane (CH[subscript 4]) reforming was carried out in an internal combustion engine (an “engine reformer”). We successfully produced syngas from the partial oxidation of natural gas in the cylinder of a diesel engine that was reconfigured to perform spark ignition. Performing the reaction in an engine cylinder allows some of the exothermicity to be captured as useful work. Intake conditions of 110 kPa and up to 480 °C allowed low cycle-to-cycle variability (COV[subscript nimep] < 20 %) at methane-air equivalence ratios (ϕ[subscript M]) of 2.0, producing syngas with an H[subscript 2]-to-CO ratio of 1.4. Spark ignition timing was varied between 45–30° before top-dead-center (BTDC) piston position, showing significant improvement with delayed timing. Hydrogen (H[subscript 2]) and ethane (C[subscript 2]H[subscript 6]) were added to simulate recycle from a downstream synthesis reactor and realistic natural gas compositions, respectively. Adding these gases yielded a stable combustion up to hydrocarbon-air equivalence ratios (ϕ[subscript HC]) of 2.8 with COV[subscript nimep] < 5 %. Ethane concentrations (with respect to methane) of up to 0.2 L/L (20 vol%) (with and without H[subscript 2]) produced robust and stable combustions, demonstrating that the engine can be operated across a range of natural gas compositions. Engine exhaust soot concentrations demonstrated elevated values at ϕ[subscript HC] > 2.4, but < 1 mg/L below these equivalence ratios. These results demonstrate that the engine reformer could be a key component of a compact gas-to-liquids synthesis plant by highlighting the operating conditions under which high gas conversion, high H[subscript 2]-to-CO ratios close to 2.0, and low soot production are possible.
MIT Department
Massachusetts Institute of Technology. Department of Chemical Engineering
Massachusetts Institute of Technology. Department of Mechanical Engineering
Massachusetts Institute of Technology. Engineering Systems Division
Massachusetts Institute of Technology. Plasma Science and Fusion Center
MIT Energy Initiative
Terms of Use
Creative Commons Attribution-Noncommercial-Share Alike
Persistent DSpace Link
DOI of Published Version
https://doi.org/10.1002/cjce.22443
